| ATTACHMENT METHOD | MOUNTING HOLEMOUNTING HOLE |
| BODY RECESS NOMINAL DEPTH | 1.236 INCHES FIRST END1.236 INCHES FIRST END |
| BORE NOMINAL DIAMETER | 6.600 INCHES BOTH ENDS6.600 INCHES BOTH ENDS |
| BORE STYLE | PLAIN BOTH ENDSPLAIN BOTH ENDS |
| END NOMINAL DIAMETER | 5.940 INCHES FIRST END5.940 INCHES FIRST END |
| END NOMINAL LENGTH | 0.230 INCHES FIRST END0.230 INCHES FIRST END |
| FACE NOMINAL WIDTH | 0.120 INCHES0.120 INCHES |
| FIRST STEP NOMINAL DIAMETER | 6.320 INCHES FIRST END6.320 INCHES FIRST END |
| FIRST STEP NOMINAL LENGTH | 0.064 INCHES FIRST END0.064 INCHES FIRST END |
| HARDNESS RATING | 30.0 ROCKWELL C MINIMUM AND 30.0 ROCKWELL C MINIMUM AND 40.0 ROCKWELL C MAXIMUM OVERALL40.0 ROCKWELL C MAXIMUM OVERALL |
| MATERIAL DOCUMENT AND CLASSIFICATION | AMS6260 ASSN STD SINGLE MATERIAL RESPONSE OVERALLAMS6260 ASSN STD SINGLE MATERIAL RESPONSE OVERALL |
| MATERIAL | STEEL OVERALLSTEEL OVERALL |
| PITCH DIAMETER | 7.1020 INCHES MINIMUM AND 7.1020 INCHES MINIMUM AND 7.1060 INCHES MAXIMUM7.1060 INCHES MAXIMUM |
| PRESSURE ANGLE | 20.0000 DEGREES20.0000 DEGREES |
| MOUNTING HOLE TYPE AND QUANTITY | 16 PLAIN AXIALLY THROUGH BODY SECOND END16 PLAIN AXIALLY THROUGH BODY SECOND END |
| MOUNTING HOLE NOMINAL DIAMETER | 0.406 INCHES AXIALLY THROUGH BODY SECOND END0.406 INCHES AXIALLY THROUGH BODY SECOND END |
| NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | 1.004 INCHES SECOND END1.004 INCHES SECOND END |
| NOMINAL OVERALL LENGTH | 1.450 INCHES1.450 INCHES |
| NOMINAL OUTSIDE DIAMETER | 7.104 INCHES7.104 INCHES |
| SECOND STEP NOMINAL DIAMETER | 6.800 INCHES FIRST END6.800 INCHES FIRST END |
| SECOND STEP NOMINAL LENGTH | 0.364 INCHES FIRST END0.364 INCHES FIRST END |
| STYLE DESIGNATOR | SIDE FACE, FRONT HUB RECESSED, BACK HUB PROTRUDINGSIDE FACE, FRONT HUB RECESSED, BACK HUB PROTRUDING |
| TEETH QUANTITY | 7474 |
| TEETH TYPE | ZEROLZEROL |
| TOOTH DIRECTION | RIGHTRIGHT |