| ATTACHMENT METHOD | MOUNTING HOLEMOUNTING HOLE |
| BODY STYLE | PLAIN, SOLIDPLAIN, SOLID |
| BORE NOMINAL DIAMETER | 0.532 INCHES BOTH ENDS0.532 INCHES BOTH ENDS |
| BORE STYLE | PLAIN BOTH ENDSPLAIN BOTH ENDS |
| FACE NOMINAL WIDTH | 0.308 INCHES0.308 INCHES |
| HUB NOMINAL DIAMETER | 0.750 INCHES SECOND END0.750 INCHES SECOND END |
| HUB STYLE DESIGNATOR | PLAIN SECOND ENDPLAIN SECOND END |
| MATERIAL DOCUMENT AND CLASSIFICATION | FED STD 66 FED STD SINGLE MATERIAL RESPONSE OVERALLFED STD 66 FED STD SINGLE MATERIAL RESPONSE OVERALL |
| MATERIAL | STEEL COMP 416 OVERALLSTEEL COMP 416 OVERALL |
| PITCH ANGLE | 45.0000 DEGREES45.0000 DEGREES |
| PITCH DIAMETER | 1.5000 INCHES NOMINAL1.5000 INCHES NOMINAL |
| PRESSURE ANGLE | 20.0000 DEGREES20.0000 DEGREES |
| MOUNTING HOLE NOMINAL THREAD SIZE | 0.138 INCHES TRANSVERSELY THROUGH HUB FIRST END0.138 INCHES TRANSVERSELY THROUGH HUB FIRST END |
| MOUNTING HOLE THREAD SERIES DESIGNATOR | UNIFIED NATIONAL COARSE (UNC) TRANSVERSELY THROUGH HUB FIRST END |
| MOUNTING HOLE TYPE AND QUANTITY | 1 PLAIN AND 1 PLAIN AND 1 THREADED TRANSVERSELY THROUGH HUB FIRST END1 THREADED TRANSVERSELY THROUGH HUB FIRST END |
| MOUNTING HOLE NOMINAL DIAMETER | 0.142 INCHES TRANSVERSELY THROUGH HUB FIRST END0.142 INCHES TRANSVERSELY THROUGH HUB FIRST END |
| NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | 0.328 INCHES SECOND END0.328 INCHES SECOND END |
| NOMINAL OUTSIDE DIAMETER | 1.588 INCHES1.588 INCHES |
| NOMINAL OVERALL LENGTH | 0.733 INCHES0.733 INCHES |
| STYLE DESIGNATOR | PERIPHERAL FACE, BACK HUB PROTRUDINGPERIPHERAL FACE, BACK HUB PROTRUDING |
| SURFACE TREATMENT | PASSIVATE OVERALLPASSIVATE OVERALL |
| TEETH QUANTITY | 2424 |
| TEETH TYPE | STRAIGHTSTRAIGHT |