|
|
|
National Stock Number:
3020-00-411-2159
Federal Supply Class:
3020
National Item Identification Number:
004112159
Description:
GEAR,BEVEL
Detail:
A gear in the form of a frustum of a cone, with straight, skewed, or curved teeth, cut on the external face. See also GEAR, ANTIBACKLASH, BEVEL.
|
Manufacturer Information:
| 25704-281542-06-0 | D1839 | BUNDESAMT FUER AUSRUESTUNG, | | 25704-281542-06-0 | D2692 | KRAUSS-MAFFEI WEGMANN GMBH & CO. KG-WERK KASSEL- | | 8734001 | 19207 | U S ARMY TANK AUTOMOTIVE COMMAND AMSTA-IM-MM | | 3020004112159 | A00AM | E.C.A ETABLISSEMENT CENTRAL DESAPPROVISIONNEMENTS DES FORCES ARMEE | | 8734001 | D5589 | FEINMECHANISCHE WERKE MAINZ GMBH | | 3020004112159 | SCY13 | E.C.A ETABLISSEMENT CENTRALD'APPROVISIONNEMENT DES FORCES ARMEE | | 8734001 | D9893 | LIEBHERR-AEROSPACE LINDENBERG GMBH |
|
Techincal Specification:
| BODY RECESS NOMINAL DEPTH | 0.1260 INCHES FIRST END | | BODY STYLE | PLAIN, SOLID | | BORE NOMINAL DIAMETER | 1.579 INCHES BOTH ENDS | | BORE STYLE | INVOLUTE SPLINE BOTH ENDS | | END NOMINAL DIAMETER | 2.249 INCHES FIRST END | | END NOMINAL DIAMETER | 2.249 INCHES SECOND END | | END NOMINAL LENGTH | 0.312 INCHES FIRST END | | END NOMINAL LENGTH | 0.312 INCHES SECOND END | | FACE NOMINAL WIDTH | 0.500 INCHES | | FIRST STEP NOMINAL DIAMETER | 2.440 INCHES FIRST END | | FIRST STEP NOMINAL DIAMETER | 2.440 INCHES SECOND END | | FIRST STEP NOMINAL LENGTH | 0.308 INCHES SECOND END | | HARDNESS RATING | 29.0 ROCKWELL C MINIMUM AND 34.0 ROCKWELL C MAXIMUM OVERALL | | HUB STYLE DESIGNATOR | 1 STEP FIRST END | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-624 FED SPEC SINGLE MATERIAL RESPONSE OVERALL | | MATERIAL | STEEL COMP 4140 OVERALL | | PITCH ANGLE | 34.5625 DEGREES | | PITCH DIAMETER | 2.5833 INCHES NOMINAL | | PRESSURE ANGLE | 14.5000 DEGREES | | NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | 0.621 INCHES SECOND END | | NOMINAL OVERALL LENGTH | 1.000 INCHES | | NOMINAL OUTSIDE DIAMETER | 2.7310 INCHES | | SPLINE PITCH DIAMETER | 1.5000 INCHES NOMINAL BOTH ENDS | | SPLINE QUANTITY | 24 BOTH ENDS | | STYLE DESIGNATOR | PERIPHERAL FACE, BACK HUB PROTRUDING | | TEETH QUANTITY | 31 | | TEETH TYPE | STRAIGHT |
|
|