| MATERIAL | STEEL COMP 303SE OVERALL |
| MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-764,COND A FED SPEC SINGLE MATERIAL RESPONSE OVERALL |
| SURFACE TREATMENT | PASSIVATE OVERALL |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-F-14072,FINISH E300 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL |
| FACE TYPE | STRAIGHT |
| THREAD FORM QUANTITY | 4 |
| THREAD FORM DIRECTION | RIGHT-HAND |
| PRESSURE ANGLE | 20.0000 DEGREES |
| HELIX ANGLE | 14.0333 DEGREES |
| STYLE DESIGNATOR | PROTRUDING HUB |
| PITCH DIAMETER | 0.3323 INCHES MINIMUM AND |
| 0.3333 INCHES MAXIMUM |
| NOMINAL OUTSIDE DIAMETER | 0.374 INCHES |
| FACE NOMINAL WIDTH | 0.492 INCHES |
| NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | 0.188 INCHES FIRST END |
| BORE STYLE | W/COUNTERBORE BOTH ENDS |
| BORE NOMINAL DIAMETER | 0.125 INCHES BOTH ENDS |
| COUNTERBORE NOMINAL DEPTH | 0.045 INCHES COUNTERBORE, FIRST END |
| 0.230 INCHES COUNTER BORE, SECOND END |
| COUNTERBORE NOMINAL DIAMETER | 0.254 INCHES COUNTERBORE, FIRST END |
| 0.150 INCHES COUNTER BORE, SECOND END |
| HUB STYLE DESIGNATOR | PINNED FIRST END |
| HUB NOMINAL DIAMETER | 0.312 INCHES FIRST END |