| MATERIAL | ALUMINUM ALLOY 2024 OVERALL |
| MATERIAL DOCUMENT AND CLASSIFICATION | QQ-A-250/4,T4 FED SPEC SINGLE MATERIAL RESPONSE OVERALL |
| SURFACE TREATMENT | ANODIZE OVERALL |
| TEETH QUANTITY | 65 |
| TOOTH FORM | STUB |
| PRESSURE ANGLE | 45.0000 DEGREES |
| STYLE DESIGNATOR | PROTRUDING HUB |
| PITCH DIAMETER | 0.8115 INCHES MINIMUM AND |
| 0.8125 INCHES MAXIMUM |
| NOMINAL OUTSIDE DIAMETER | 0.837 INCHES |
| FACE NOMINAL WIDTH | 0.070 INCHES |
| NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | 0.090 INCHES FIRST END |
| BORE STYLE | PLAIN BOTH ENDS |
| BORE NOMINAL DIAMETER | 0.313 INCHES BOTH ENDS |
| HUB STYLE DESIGNATOR | 1 STEP FIRST END |
| END NOMINAL LENGTH | 0.010 INCHES FIRST END |
| END NOMINAL DIAMETER | 0.375 INCHES FIRST END |
| FIRST STEP NOMINAL LENGTH | 0.080 INCHES FIRST END |
| FIRST STEP NOMINAL DIAMETER | 0.500 INCHES FIRST END |
| BODY STYLE | PLAIN, SOLID |
| ATTACHMENT METHOD | MOUNTING HOLE |
| MOUNTING HOLE TYPE AND QUANTITY | 2 THREADED TRANSVERSELY THROUGH HUB, FIRST END |
| MOUNTING HOLE THREAD SERIES DESIGNATOR | UNC TRANSVERSELY THROUGH HUB, FIRST END |
| MOUNTING HOLE NOMINAL THREAD SIZE | 0.060 INCHES TRANSVERSELY THROUGH HUB, FIRST END |
| MOUNTING HOLE THREAD QUANTITY PER INCH | 80 TRANSVERSELY THROUGH HUB, FIRST END |
| THE MANUFACTURERS DATA | |
| MANUFACTURERS CODE | 09966 |
| DESIGN CONTROL REFERENCE | 6019-441 |