|
|
|
National Stock Number:
3020-00-406-3519
Federal Supply Class:
3020
National Item Identification Number:
004063519
Description:
GEAR,ANTIBACKLASH,SPUR
Detail:
An item having one fixed gear and one free gear, both having the same complement of spur gear teeth, mounted on a common hub. The free gear is attached to the fixed gear by springs and operates as one gear. Upon installation with the mating gear, the teeth of the free moving gear are preset to mesh with teeth other than those of the fixed gear. This spring tension between the fixed gear and the free gear eliminates any free motion between the driver and the driven gear. The gear is used where identical and accurate transmitted motion between gears is required.
|
Manufacturer Information:
| 60878-5 | 82340 | L3HARRIS TECHNOLOGIES, INC. | | 60878-5 | 9Y580 | L3HARRIS TECHNOLOGIES, INC. | | AB250-100P2-0-2498 | 01351 | SOUTHERN GEAR & MACHINE INC |
|
Techincal Specification:
| MATERIAL | ALUMINUM ALLOY 2024 CLAMP | | STEEL COMP 303 HUB | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-A-250/4,T4 FED SPEC SINGLE MATERIAL RESPONSE CLAMP | | MIL-S-7720 MIL SPEC SINGLE MATERIAL RESPONSE HUB | | SURFACE TREATMENT | ANODIZE CLAMP | | PASSIVATE HUB | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-A-8625,TYPE 1 MIL SPEC SINGLE TREATMENT RESPONSE CLAMP | | MIL-F-14072 MIL SPEC SINGLE TREATMENT RESPONSE HUB | | TEETH QUANTITY | 100 | | TOOTH FORM | STANDARD | | PRESSURE ANGLE | 20.0000 DEGREES | | PRECISION CLASSIFICATION | QUALITY NUMBER 12 | | BACKLASH DESIGNATION | GRADE D | | STYLE DESIGNATOR | PROTRUDING HUB | | PITCH DIAMETER | 1.5625 INCHES NOMINAL | | NOMINAL OUTSIDE DIAMETER | 1.5937 INCHES | | FACE NOMINAL WIDTH | 0.125 INCHES | | NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | 0.250 INCHES FIRST END | | BORE STYLE | PLAIN BOTH ENDS | | BORE NOMINAL DIAMETER | 0.250 INCHES BOTH ENDS | | HUB STYLE DESIGNATOR | PINNED FIRST END | | HUB NOMINAL DIAMETER | 0.375 INCHES FIRST END | | THE MANUFACTURERS DATA | | | MANUFACTURERS CODE | 9Y580 | | DESIGN CONTROL REFERENCE | 60878-5 |
|
|