| MATERIAL | STEEL COMP 303 OVERALL |
| MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-764,TYPE 303,COND A FED SPEC SINGLE MATERIAL RESPONSE OVERALL |
| SURFACE TREATMENT | PASSIVATE OVERALL |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-F-14072,FINISH E300 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL |
| TEETH QUANTITY | 24 |
| TOOTH FORM | STANDARD |
| PRESSURE ANGLE | 20.0000 DEGREES |
| PRECISION CLASSIFICATION | QUALITY NUMBER 10 OR |
| QUALITY NUMBER 11 |
| STYLE DESIGNATOR | PROTRUDING HUB |
| PITCH DIAMETER | 0.3740 INCHES MINIMUM AND |
| 0.3750 INCHES MAXIMUM |
| NOMINAL OVERALL LENGTH | 0.312 INCHES |
| NOMINAL OUTSIDE DIAMETER | 0.405 INCHES |
| FACE NOMINAL WIDTH | 0.125 INCHES |
| NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | 0.187 INCHES FIRST END |
| BORE STYLE | PLAIN BOTH ENDS |
| BORE NOMINAL DIAMETER | 0.120 INCHES BOTH ENDS |
| HUB STYLE DESIGNATOR | PINNED FIRST END |
| HUB NOMINAL DIAMETER | 0.297 INCHES FIRST END |
| BODY STYLE | PLAIN, SOLID |
| ATTACHMENT METHOD | MOUNTING HOLE |
| MOUNTING HOLE TYPE AND QUANTITY | 2 THREADED TRANSVERSELY THROUGH HUB, FIRST END |
| MOUNTING HOLE THREAD SERIES DESIGNATOR | UNC TRANSVERSELY THROUGH HUB, FIRST END |
| MOUNTING HOLE NOMINAL THREAD SIZE | 0.086 INCHES TRANSVERSELY THROUGH HUB, FIRST END |
| MOUNTING HOLE THREAD QUANTITY PER INCH | 56 TRANSVERSELY THROUGH HUB, FIRST END |
| SPECIAL FEATURES | MOUNTING HOLES LOCATED 180 DEG APART |
| THE MANUFACTURERS DATA | |
| MANUFACTURERS CODE | 93322 |
| DESIGN CONTROL REFERENCE | 7602319 |