|
|
|
National Stock Number:
3020-00-163-5294
Federal Supply Class:
3020
National Item Identification Number:
001635294
Description:
GEAR,SPUR
Detail:
A gear, cylindrical in form, with straight teeth on the outer surface parallel to the axis of the gear. See also GEAR, ANTIBACKLASH, SPUR. For bulk material, see ROD, PINION.
|
Manufacturer Information:
| 116C3779 | 05606 | GENERAL DYNAMICS-OTS, INC. |
|
Techincal Specification:
| BODY STYLE | PLAIN, SOLID | | BORE STYLE | INVOLUTE SPLINE BOTH ENDS | | BORE NOMINAL DIAMETER | 0.780 INCHES BOTH ENDS | | FACE NOMINAL WIDTH | 0.626 INCHES | | HARDNESS RATING | 25.0 ROCKWELL C MINIMUM HUB | | HARDNESS RATING | 60.0 ROCKWELL C MAXIMUM TEETH | | HUB NOMINAL DIAMETER | 1.000 INCHES BOTH ENDS | | HUB STYLE DESIGNATOR | PLAIN BOTH ENDS | | MATERIAL DOCUMENT AND CLASSIFICATION | 66,AISI/SAE FED STD SINGLE MATERIAL RESPONSE OR QQ-S-624 FED SPEC SINGLE MATERIAL RESPONSE OVERALL | | MATERIAL | STEEL COMP E9310 OR STEEL COMP 8620 OVERALL | | NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | 0.090 INCHES SECOND END | | NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | 0.180 INCHES FIRST END | | NOMINAL OUTSIDE DIAMETER | 2.177 INCHES | | PITCH DIAMETER | 2.0625 INCHES NOMINAL | | PRESSURE ANGLE | 20.0000 DEGREES | | PRECISION CLASSIFICATION | QUALITY NUMBER 9 | | SPLINE PITCH DIAMETER | 0.7190 INCHES NOMINAL BOTH ENDS | | SPLINE QUANTITY | 23 BOTH ENDS | | STYLE DESIGNATOR | PROTRUDING HUBS | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-STD-171 FINISH 5.3.1.2 OR 5.3.2.2 MIL STD SINGLE TREATMENT RESPONSE OVERALL | | SURFACE TREATMENT | PHOSPHATE OVERALL | | TEETH QUANTITY | 33 | | TEST DATA DOCUMENT | 81349-MIL-I-6868 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). | | TOOTH FORM | STANDARD |
|
|