| ATTACHMENT METHOD | MOUNTING HOLE |
| BODY STYLE | PLAIN, SOLID |
| BORE NOMINAL DIAMETER | 0.187 INCHES BOTH ENDS |
| BORE STYLE | PLAIN BOTH ENDS |
| FACE NOMINAL WIDTH | 0.187 INCHES |
| HUB NOMINAL DIAMETER | 0.375 INCHES FIRST END |
| HUB STYLE DESIGNATOR | PINNED FIRST END |
| MATERIAL DOCUMENT AND CLASSIFICATION | MIL-M-20693,TYPE 1 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL |
| MATERIAL | PLASTIC POLYHEXAMETHYLENE AMIDE OVERALL |
| PITCH DIAMETER | 1.4990 INCHES MINIMUM AND 1.5000 INCHES MAXIMUM |
| MOUNTING HOLE NOMINAL THREAD SIZE | 0.112 INCHES TRANSVERSELY THROUGH HUB FIRST END |
| MOUNTING HOLE THREAD QUANTITY PER INCH | 40 TRANSVERSELY THROUGH HUB FIRST END |
| MOUNTING HOLE THREAD SERIES DESIGNATOR | UNIFIED NATIONAL COARSE (UNC) TRANSVERSELY THROUGH HUB FIRST END |
| MOUNTING HOLE TYPE AND QUANTITY | 1 THREADED TRANSVERSELY THROUGH HUB FIRST END |
| NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | 0.219 INCHES FIRST END |
| NOMINAL OUTSIDE DIAMETER | 1.530 INCHES |
| NOMINAL OVERALL LENGTH | 0.406 INCHES |
| PRECISION CLASSIFICATION | QUALITY NUMBER 10 OR QUALITY NUMBER 11 |
| PRESSURE ANGLE | 20.0000 DEGREES |
| STYLE DESIGNATOR | PROTRUDING HUB |
| TEETH QUANTITY | 96 |
| TOOTH FORM | STANDARD |