| MATERIAL | ALUMINUM ALLOY 6061 OVERALL |
| MATERIAL DOCUMENT AND CLASSIFICATION | QQ-A-225/8,T6 FED SPEC SINGLE MATERIAL RESPONSE OVERALL |
| SURFACE TREATMENT | ANODIZE OVERALL |
| TEETH QUANTITY | 60 |
| TOOTH FORM | STANDARD |
| PRESSURE ANGLE | 20.0000 DEGREES |
| PRECISION CLASSIFICATION | QUALITY NUMBER 10 OR |
| QUALITY NUMBER 11 |
| STYLE DESIGNATOR | PROTRUDING HUBS |
| PITCH DIAMETER | 0.7490 INCHES MINIMUM AND |
| 0.7500 INCHES MAXIMUM |
| NOMINAL OVERALL LENGTH | 0.374 INCHES |
| NOMINAL OUTSIDE DIAMETER | 0.774 INCHES |
| FACE NOMINAL WIDTH | 0.046 INCHES |
| NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | 0.204 INCHES FIRST END |
| 0.125 INCHES SECOND END |
| BORE STYLE | PLAIN BOTH ENDS |
| BORE NOMINAL DIAMETER | 0.125 INCHES BOTH ENDS |
| END NOMINAL DIAMETER | 0.312 INCHES SECOND END |
| FIRST GROOVE NOMINAL WIDTH | 0.035 INCHES SECOND END |
| FIRST GROOVE NOMINAL DIAMETER | 0.290 INCHES FIRST END |
| 0.290 INCHES SECOND END |
| NOMINAL DISTANCE FROM END TO FIRST GROOVE | 0.122 INCHES FIRST END |
| 0.044 INCHES SECOND END |
| BODY STYLE | PLAIN, SOLID |
| ATTACHMENT METHOD | MOUNTING HOLE |
| MOUNTING HOLE TYPE AND QUANTITY | 2 THREADED TRANSVERSELY THROUGH HUB, FIRST END |
| MOUNTING HOLE THREAD SERIES DESIGNATOR | UNC TRANSVERSELY THROUGH HUB, FIRST END |
| MOUNTING HOLE NOMINAL THREAD SIZE | 0.086 INCHES TRANSVERSELY THROUGH HUB, FIRST END |
| MOUNTING HOLE THREAD QUANTITY PER INCH | 56 TRANSVERSELY THROUGH HUB, FIRST END |
| FURNISHED ITEMS AND QUANTITY | 1 LUBRICANT IMPREGNATED BEARING |
| SPECIAL FEATURES | MTG HOLES ON FIRST END SPCAED 90 DEG APART; ONE 0.125 IN. DIA HOLE THROUGH BODY OF GEAR ON A 0.250 IN. DIA BOLT CIRCLE; HUB STYLE 6 ON BOTH ENDS |
| THE MANUFACTURERS DATA | |
| MANUFACTURERS CODE | 11871 |
| DESIGN CONTROL REFERENCE | 6800-3063 |