| PART NAME ASSIGNED BY CONTROLLING AGENCY | TRANSFER CYLINDER BODY,MACHINED/WELDMT ASSY |
| PROPRIETARY CHARACTERISTICS | PACS |
| MOUNTING HOLE QUANTITY | 10 |
| MOUNTING HOLE TYPE | PLAIN AND THRU HOLE AND COUNTERSUNK |
| MOUNTING METHOD | BOLTED |
| NOMINAL HOLE DIAMETER AND QUANTITY | 0.201 INCHES SIX HOLES AND 0.250 INCHES FOUR HOLES |
| NOMINAL THREAD DIAMETER | 0.250 INCHES |
| OVERALL LENGTH | 16.45 INCHES NOMINAL |
| OVERALL WIDTH | 1.500 INCHES NOMINAL |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL STD 171,5.3.2.3 PLUS 30.7 MIL STD SINGLE TREATMENT RESPONSE |
| SURFACE TREATMENT | CARC (CHEMICAL AGENT RESISTANT COATING) AND PRIMER EPOXY AND PAINTED AND NON-CHROMIC ACID RINSE |
| THREAD CLASS | 2B |
| THREAD QUANTITY PER INCH | 28 |
| THREAD SERIES DESIGNATOR | UNF |
| USAGE DESIGN | COMBAT VEHICLE |
| HARDNESS RATING | 34.0 ROCKWELL C MINIMUM AND 38.0 ROCKWELL C MAXIMUM |
| HEAT TREATMENT | QUENCHED |
| MATERIAL DOCUMENT AND CLASSIFICATION | ASTM A322 ASSN STD SINGLE MATERIAL RESPONSE AND ASTM A331 ASSN STD SINGLE MATERIAL RESPONSE OR ASTM A829 ASSN STD SINGLE MATERIAL RESPONSE |
| MATERIAL | STEEL COMP 4130 |