| ANGLE OF SHAFT TO MOUNTING BASE | 180.0 DEGREES SINGLE END |
| CONNECTION TYPE AND VOLTAGE RATING IN VOLTS | 90.0 LINE TO NEUTRAL SINGLE INPUT |
| COOLING METHOD | AMBIENT AIR |
| CURRENT RATING IN AMPS | 0.7500 SINGLE INPUT |
| CURRENT RATING METHOD | LOAD |
| CURRENT TYPE | DC INPUT |
| DUTY CYCLE | CONTINUOUS |
| ENCLOSURE FEATURE | TOTALLY ENCLOSED |
| GEARED HEAD OUTPUT SHAFT ALIGNMENT POSITION | OFFSET BELOW PARALLEL TO SHAFT AXIS SINGLE END |
| GEARED HEAD OUTPUT SHAFT SPEED RATING | 6.5000 SINGLE REVOLUTIONS PER MINUTE SINGLE END |
| KEYWAY CENTER TO SHAFT END DISTANCE | 0.6300 INCHES NOMINAL SINGLE END |
| LENGTH OF SHAFT FROM HOUSING | 1.5000 INCHES SINGLE END |
| POWER RATING | 0.0666 HORSEPOWER INPUT |
| MOUNTING FACILITY CIRCLE DIAMETER | 0.281 INCHES |
| MOUNTING FACILITY TYPE AND QUANTITY | 4 UNTHREADED HOLE(S) |
| MOUNTING METHOD | FIXED BASE |
| NOMINAL CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO LENGTH | 1.5000 INCHES |
| NOMINAL CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO WIDTH | 6.3800 INCHES |
| OVERALL HEIGHT | 5.0000 INCHES |
| OVERALL LENGTH | 10.1300 INCHES |
| OVERALL WIDTH | 6.4400 INCHES |
| SHAFT CENTER TO MOUNTING SURFACE DISTANCE | 2.5000 INCHES SINGLE END |
| SHAFT DIAMETER | 0.7500 INCHES NOMINAL SINGLE END |
| SHAFT END CHARACTERISTIC | A11 SINGLE STYLE SINGLE END |
| SHAFT ROTATION DIRECTION | COUNTERCLOCKWISE SINGLE END |
| SPEED CONTROL METHOD AND DEVICE TYPE | ELECTRICAL DIFFERENTIAL |
| TEMP RATING | 40.0 AMBIENT CELSIUS |
| TERMINAL TYPE AND QUANTITY | 2 WIRE LEAD |
| TORQUE RATING AND TYPE | 500.0 INCH-POUNDS RUNNING |
| WINDING TYPE | PERMANENT MAGNET |
| WOODRUFF KEY SIZE DESIGNATION | 605 SINGLE END |