|
|
|
National Stock Number:
3010-01-418-8886
Federal Supply Class:
3010
National Item Identification Number:
014188886
Description:
UNIVERSAL JOINT,NONVEHICULAR
Detail:
A FLEXIBLE CONNECTION DESIGNED FOR NONVEHICULAR APPLICATIONS WHICH PERMITS ROTARY MOTION TO BE TRANSMITTED BETWEEN TWO SHAFTS LOCATED AT AN ANGLE TO EACH OTHER. THE ANGLE BETWEEN THE SHAFTS MAY BE CONTINUALLY VARIED WITHIN CERTAIN LIMITS; THE CONNECTING ENDS MUST HAVE EITHER A FLANGE, HUB, OR SPLINED STUB SHAFT; THE PLAIN PORTION OF A SPLINED STUB SHAFT MUST NOT EXCEED THE LENGTH OF THE SPLINES. EXCLUDES DRIVE OR PROPELLER SHAFTS WITH JOINT(S) AT ONE OR BOTH ENDS. SEE UNIVERSAL JOINT,GEARED.
|
Manufacturer Information:
| 211082493 | 53711 | NAVAL SEA SYSTEMS COMMAND | | 528-6409001 FIND 9 | 53711 | NAVAL SEA SYSTEMS COMMAND | | DA2500-3567 #9 | 43689 | HUNTINGTON INGALLS INC | | 6409001 | 53711 | NAVAL SEA SYSTEMS COMMAND | | M55342/6-K750JR | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | | C-650-S | 83529 | LOVEJOY, LLC | | M55342K06B75D0R | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M |
|
Techincal Specification:
| CONNECTION END TYPE | HUB,SQUARE BORE FIRST END | | HUB,BORED SECOND END | | OVERALL LENGTH | 7.420 INCHES NOMINAL | | DESIGN TYPE | BLOCK AND PIN | | HUB BORE DIAMETER | 0.686 INCHES MINIMUM AND | | 0.697 INCHES MAXIMUM FIRST END | | 0.750 INCHES MINIMUM AND | | 0.755 INCHES MAXIMUM SECOND END | | HUB BORE WIDTH ACROSS FLATS | 0.750 INCHES MINIMUM AND | | 0.755 INCHES MAXIMUM FIRST END | | 1.28 INCHES NOMINAL SECOND END | | SPECIAL FEATURES | USED ON REMOTE OPERATING GEAR FOR PLUMBING VLAVE PL-8 ARRANGEMENT, SECOND END OD SQ 1.500 IN. ACROSS CORNERS WITH 2 SECURING HOLES 0.380 IN. AND 0.810 IN. FROM HUB END 90 DEGREES APART, LG FROM UNIVERSAL JOINT CENTER TO HUB END 2.120 IN., FIRST END LG FROM UNIVERSAL JOINT CENTER TO HUB END 5.310 IN. |
|
|