| ANGLE OF SHAFT TO MOUNTING BASE | 90.0 DEGREES SINGLE END |
| CONNECTION TYPE AND VOLTAGE RATING IN VOLTS | 115.0 LINE TO NEUTRAL SINGLE INPUT |
| COOLING METHOD | AMBIENT AIR |
| CURRENT RATING IN AMPS | 4.900 SINGLE OUTPUT |
| CURRENT RATING METHOD | LOAD |
| CURRENT TYPE | AC INPUT |
| DUTY CYCLE | CONTINUOUS |
| ENCLOSURE FEATURE | TOTALLY ENCLOSED |
| FEATURES PROVIDED | VERTICAL MOUNTING POSITION AND HORIZONTAL MOUNTING POSITION |
| FREQUENCY IN HERTZ | 60.0 INPUT |
| GEARED HEAD OUTPUT SHAFT ALIGNMENT POSITION | OFFSET ABOVE PARALLEL TO SHAFT AXIS SINGLE END |
| GEARED HEAD OUTPUT SHAFT SPEED RATING | 135.000 SINGLE REVOLUTIONS PER MINUTE SINGLE END |
| INCLOSURE SPECIFICATION | COMMERCIAL |
| KEYWAY DEPTH | 0.0940 INCHES NOMINAL SINGLE END |
| KEYWAY LENGTH | 1.0000 INCHES NOMINAL SINGLE END |
| KEYWAY WIDTH | 0.1880 INCHES NOMINAL SINGLE END |
| LENGTH OF SHAFT FROM HOUSING | 1.500 INCHES SINGLE END |
| PHASE | SINGLE INPUT |
| POWER RATING | 0.1666 HORSEPOWER OUTPUT |
| MOUNTING FACILITY TYPE AND QUANTITY | 4 UNTHREADED HOLE |
| MOUNTING METHOD | FIXED BASE |
| NOMINAL CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO LENGTH | 3.125 INCHES |
| NOMINAL CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO WIDTH | 4.000 INCHES |
| OVERALL HEIGHT | 6.250 INCHES |
| OVERALL LENGTH | 12.000 INCHES |
| OVERALL WIDTH | 6.750 INCHES |
| SHAFT CENTER TO MOUNTING SURFACE DISTANCE | 2.250 INCHES SINGLE END |
| SHAFT DIAMETER | 0.6250 INCHES NOMINAL SINGLE END |
| SHAFT END CHARACTERISTIC | A9 SINGLE STYLE SINGLE END |
| SHAFT ROTATION DIRECTION | CLOCKWISE SINGLE END |
| SPEED CONTROL METHOD AND DEVICE TYPE | AUTOMATIC MECHANICAL |
| TERMINAL TYPE AND QUANTITY | 5 WIRE LEAD |
| TORQUE RATING AND TYPE | 3.5 INCH-POUNDS STARTING |
| WINDING TYPE | INDUCTION-SPLIT PHASE |