| ANGLE OF SHAFT TO MOUNTING BASE | 90.0 DEGREES SINGLE END |
| CONNECTION TYPE AND VOLTAGE RATING IN VOLTS | 115.0 LINE TO NEUTRAL SINGLE INPUT |
| COOLING METHOD | FAN COOLED |
| CURRENT RATING IN AMPS | 0.360 SINGLE OUTPUT |
| CURRENT RATING METHOD | LOAD |
| CURRENT TYPE | AC INPUT |
| DUTY CYCLE | CONTINUOUS |
| ENCLOSURE FEATURE | OPEN PROTECTED |
| FEATURES PROVIDED | VERTICAL MOUNTING POSITION AND HORIZONTAL MOUNTING POSITION |
| FLAT DEPTH | 0.020 INCHES NOMINAL IDENTICAL ENDS |
| FLATTED PORTION LENGTH | 0.810 INCHES NOMINAL IDENTICAL ENDS |
| FREQUENCY IN HERTZ | 60.0 INPUT |
| GEARED HEAD OUTPUT SHAFT ALIGNMENT POSITION | ANGLED TO ARMATURE/ROTOR AXIS IDENTICAL ENDS |
| GEARED HEAD OUTPUT SHAFT SPEED RATING | 9.660 SINGLE REVOLUTIONS PER MINUTE SINGLE END |
| INCLOSURE SPECIFICATION | COMMERCIAL |
| LENGTH OF SHAFT FROM HOUSING | 0.940 INCHES IDENTICAL ENDS |
| PHASE | SINGLE INPUT |
| POWER RATING | 0.0066 HORSEPOWER OUTPUT |
| MOUNTING FACILITY TYPE AND QUANTITY | 4 THREADED HOLE |
| NOMINAL CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO LENGTH | 1.250 INCHES |
| NOMINAL CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO WIDTH | 1.688 INCHES |
| OVERALL HEIGHT | 3.680 INCHES |
| OVERALL LENGTH | 7.160 INCHES |
| OVERALL WIDTH | 3.500 INCHES |
| SHAFT CENTER TO MOUNTING SURFACE DISTANCE | 2.125 INCHES IDENTICAL ENDS |
| SHAFT DIAMETER | 0.3120 INCHES NOMINAL IDENTICAL ENDS |
| SHAFT END CHARACTERISTIC | A5 SINGLE STYLE IDENTICAL ENDS |
| SHAFT ROTATION DIRECTION | CLOCKWISE OR COUNTERCLOCKWISE IDENTICAL ENDS |
| SPECIAL FEATURES | SPECIAL ATTACHMENT ON GEARED END |
| SPECIFIC USE | X-Y DIALPHONE |
| SPEED CONTROL METHOD AND DEVICE TYPE | AUTOMATIC MECHANICAL |
| TEMP RATING | 40.0 OPERATING CELSIUS |
| TERMINAL TYPE AND QUANTITY | 4 WIRE LEAD |
| TORQUE RATING AND TYPE | 7.0 INCH-POUNDS RUNNING |
| WINDING TYPE | INDUCTION-SPLIT PHASE |