| ANGLE OF SHAFT TO MOUNTING BASE | 90.0 DEGREES SINGLE END |
| CONNECTION TYPE AND VOLTAGE RATING IN VOLTS | 115.0 LINE TO NEUTRAL SINGLE INPUT |
| COOLING METHOD | AMBIENT AIR |
| CURRENT TYPE | AC INPUT |
| DUTY CYCLE | CONTINUOUS |
| ENCLOSURE FEATURE | INDUSTRIAL |
| FEATURES PROVIDED | HORIZONTAL MOUNTING POSITION |
| FLATTED PORTION LENGTH | 0.3125 INCHES NOMINAL SINGLE END |
| FREQUENCY IN HERTZ | 60.0 INPUT |
| GEARED HEAD OUTPUT SHAFT ALIGNMENT POSITION | ANGLED TO ARMATURE/ROTOR AXIS SINGLE END |
| GEARED HEAD OUTPUT SHAFT SPEED RATING | 3.000 SINGLE REVOLUTIONS PER MINUTE SINGLE END |
| INCLOSURE SPECIFICATION | COMMERCIAL |
| LENGTH OF SHAFT FROM HOUSING | 0.688 INCHES SINGLE END |
| PHASE | SINGLE INPUT |
| MOUNTING FACILITY TYPE AND QUANTITY | 4 THREADED HOLE |
| MOUNTING METHOD | FACE |
| NOMINAL CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO LENGTH | 1.250 INCHES |
| NOMINAL CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO WIDTH | 1.625 INCHES |
| OVERALL HEIGHT | 3.250 INCHES |
| OVERALL LENGTH | 5.375 INCHES |
| OVERALL WIDTH | 3.562 INCHES |
| SHAFT CENTER TO MOUNTING SURFACE DISTANCE | 0.485 INCHES SINGLE END |
| SHAFT DIAMETER | 0.185 INCHES MINIMUM AND 0.187 INCHES MAXIMUM SINGLE END |
| SHAFT END CHARACTERISTIC | A15 SINGLE STYLE SINGLE END |
| SHAFT ROTATION DIRECTION | CLOCKWISE OR COUNTERCLOCKWISE SINGLE END |
| SPECIAL FEATURES | EXCEPT AS MODIFIED BY STYLE,SHAFT EXTENDS IN A VITICAL POSITION EXTENDING BELOW MTG BASE |
| SPEED CONTROL METHOD AND DEVICE TYPE | ELECTRICAL MECHANICAL |
| TERMINAL TYPE AND QUANTITY | 3 WIRE LEAD |
| TORQUE RATING AND TYPE | 24.0 INCH-OUNCES STALLED |
| WIDTH ACROSS FLATS | 0.188 INCHES NOMINAL SINGLE END |
| WINDING TYPE | SERIES WOUND |