| ANGLE OF SHAFT TO MOUNTING BASE | 90.0 DEGREES SINGLE END |
| CONNECTION TYPE AND VOLTAGE RATING IN VOLTS | 120.0 LINE TO NEUTRAL SINGLE INPUT |
| COOLING METHOD | AMBIENT AIR |
| CURRENT RATING IN AMPS | 0.059 SINGLE OUTPUT |
| CURRENT RATING METHOD | LOAD |
| CURRENT TYPE | AC INPUT |
| DUTY CYCLE | CONTINUOUS |
| ENCLOSURE FEATURE | TOTALLY ENCLOSED |
| FEATURES PROVIDED | VERTICAL MOUNTING POSITION AND HORIZONTAL MOUNTING POSITION |
| FREQUENCY IN HERTZ | 50.0 OR 60.0 INPUT |
| GEARED HEAD OUTPUT SHAFT ALIGNMENT POSITION | OFFSET ABOVE PARALLEL TO SHAFT AXIS SINGLE END |
| GEARED HEAD OUTPUT SHAFT SPEED RATING | 18.000 LOW REVOLUTIONS PER MINUTE AND 22.000 HIGH REVOLUTIONS PER MINUTE SINGLE END |
| INCLOSURE SPECIFICATION | COMMERCIAL |
| LENGTH OF SHAFT FROM HOUSING | 0.375 INCHES SINGLE END |
| PHASE | SINGLE INPUT |
| MOUNTING FACILITY CIRCLE DIAMETER | 1.875 INCHES |
| MOUNTING FACILITY TYPE AND QUANTITY | 2 UNTHREADED HOLE |
| MOUNTING METHOD | FLANGE |
| OVERALL HEIGHT | 2.500 INCHES |
| OVERALL LENGTH | 1.734 INCHES |
| OVERALL WIDTH | 2.125 INCHES |
| SHAFT DIAMETER | 0.1250 INCHES NOMINAL SINGLE END |
| SHAFT END CHARACTERISTIC | A1 SINGLE STYLE SINGLE END |
| SHAFT ROTATION DIRECTION | CLOCKWISE SINGLE END |
| SPEED CONTROL METHOD AND DEVICE TYPE | MANUAL DIFFERENTIAL |
| TEMP RATING | 30.0 OPERATING FAHRENHEIT AND 130.0 OPERATING FAHRENHEIT |
| TERMINAL TYPE AND QUANTITY | 2 WIRE LEAD |
| TORQUE RATING AND TYPE | 0.5 INCH-OUNCES RUNNING |
| WINDING TYPE | SYNCHRONOUS SHADED POLE |