| ANGLE OF SHAFT TO MOUNTING BASE | 90.0 DEGREES SINGLE END |
| CONNECTION TYPE AND VOLTAGE RATING IN VOLTS | 115.0 LINE TO NEUTRAL SINGLE INPUT |
| COOLING METHOD | SELF-VENTILATED |
| CURRENT TYPE | AC INPUT |
| DUTY CYCLE | CONTINUOUS |
| ENCLOSURE FEATURE | OPEN PROTECTED |
| FEATURES PROVIDED | HORIZONTAL MOUNTING POSITION |
| FLAT DEPTH | 0.0280 INCHES NOMINAL SINGLE END |
| FLATTED PORTION LENGTH | 1.3800 INCHES NOMINAL SINGLE END |
| FREQUENCY IN HERTZ | 60.0 INPUT |
| GEARED HEAD OUTPUT SHAFT ALIGNMENT POSITION | ANGLED TO ARMATURE/ROTOR AXIS SINGLE END |
| GEARED HEAD OUTPUT SHAFT SPEED RATING | 6.000 SINGLE REVOLUTIONS PER MINUTE SINGLE END |
| INCLOSURE SPECIFICATION | COMMERCIAL |
| LENGTH OF SHAFT FROM HOUSING | 1.590 INCHES SINGLE END |
| PHASE | SINGLE INPUT |
| MOUNTING FACILITY TYPE AND QUANTITY | 4 UNTHREADED HOLE |
| NOMINAL CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO LENGTH | 2.000 INCHES |
| NOMINAL CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO WIDTH | 3.500 INCHES |
| OVERALL HEIGHT | 4.830 INCHES |
| OVERALL LENGTH | 7.220 INCHES |
| OVERALL WIDTH | 6.090 INCHES |
| SHAFT CENTER TO MOUNTING SURFACE DISTANCE | 1.570 INCHES SINGLE END |
| SHAFT DIAMETER | 0.499 INCHES MINIMUM AND 0.500 INCHES MAXIMUM SINGLE END |
| SHAFT END CHARACTERISTIC | A5 SINGLE STYLE SINGLE END |
| SHAFT ROTATION DIRECTION | CLOCKWISE OR COUNTERCLOCKWISE SINGLE END |
| SPEED CONTROL METHOD AND DEVICE TYPE | AUTOMATIC MECHANICAL |
| TERMINAL TYPE AND QUANTITY | 4 WIRE LEAD |
| WINDING TYPE | SERIES WOUND |