|
|
|
National Stock Number:
2940-01-432-4774
Federal Supply Class:
2940
National Item Identification Number:
014324774
Description:
FILTER ELEMENT,FLUID
Detail:
A replaceable device designed to remove solid particles from fluids ranging in density from heavy liquids to gases. The removal of particles is accomplished by porous material (metallic or non-metallic), stacked disks, wound wire, or the like, constructed so the fluid can flow through the device while the solid particles are retained. It may be designed to fit into a FILTER, FLUID (or similar cavity), or it may have an integral outer casing and mounting facilities and be designed to connect directly to an engine, compressor, or the like. The degree of removal of particles must be nominally rated at less than 50 microns or absolutely rated at less than 75 microns. Excludes FILTER ELEMENT, AIR CONDITIONING. See also STRAINER ELEMENT, SEDIMENT.
|
Manufacturer Information:
| 1712 | 050Q3 | NATIONAL AUTOMOTIVE PARTS ASSN/NAPA/ | | 1712 | 0HYJ6 | GENUINE PARTS COMPANY | | D8NN-B486-AA | 00501 | NEW HOLLAND N.V.NC. | | D8NN-B486-EA | 00501 | NEW HOLLAND N.V.NC. | | HF0612300 | 33457 | CUMMINS FILTRATION INC | | 51712 | 79396 | WIX CORP | | HF6123 | 33457 | CUMMINS FILTRATION INC |
|
Techincal Specification:
| BODY DIAMETER | 3.730 INCHES NOMINAL | | BODY OVERALL LENGTH | 5.390 INCHES NOMINAL | | DESIGN TYPE | NONREUSABLE | | FEATURES PROVIDED | BY-PASS VALVE | | FILTERING MEDIA DESIGN | PLEATED SINGLE FILTERING MEDIA RESPONSE | | FILTERING SYSTEM FOR WHICH DESIGNED | FULL FLOW | | FILTRATION RATING IN MICRONS | 23.0 NOMINAL | | FLOW DIRECTION | OUTSIDE IN | | MATERIAL | PAPER FILTERING MEDIUM | | MATERIAL | STEEL BODY | | MATERIAL | RUBBER SYNTHETIC SEAL | | MEDIA FOR WHICH DESIGNED | FUEL/OIL, HYDROCARBON | | NOMINAL THREAD SIZE | 1.125 INCHES | | SPECIAL FEATURES | BY-PASS SETTING 7.0-9.0 PSI | | STYLE DESIGNATOR | CYLINDRICAL W/ INTEGRAL OUTER CASING | | SURFACE TREATMENT | PAINT BODY | | THREAD DIRECTION | RIGHT-HAND | | THREAD SERIES DESIGNATOR | UN |
|
|