|
|
|
National Stock Number:
2940-01-415-4333
Federal Supply Class:
2940
National Item Identification Number:
014154333
Description:
FILTER ELEMENT,FLUID
Detail:
A replaceable device designed to remove solid particles from fluids ranging in density from heavy liquids to gases. The removal of particles is accomplished by porous material (metallic or non-metallic), stacked disks, wound wire, or the like, constructed so the fluid can flow through the device while the solid particles are retained. It may be designed to fit into a FILTER, FLUID (or similar cavity), or it may have an integral outer casing and mounting facilities and be designed to connect directly to an engine, compressor, or the like. The degree of removal of particles must be nominally rated at less than 50 microns or absolutely rated at less than 75 microns. Excludes FILTER ELEMENT, AIR CONDITIONING. See also STRAINER ELEMENT, SEDIMENT.
|
Manufacturer Information:
| 2792962 | 89749 | CLARK MATERIAL HANDLING COMPANY | | D170990 | 18265 | DONALDSON COMPANY, INC. |
|
Techincal Specification:
| STYLE DESIGNATOR | CYLINDRICAL W/ INTEGRAL OUTER CASING | | BODY DIAMETER | 96.75 MILLIMETERS NOMINAL | | BODY OVERALL LENGTH | 151.6 MILLIMETERS NOMINAL | | THREAD SERIES DESIGNATOR | UNF | | NOMINAL THREAD SIZE | 0.875 INCHES | | THREAD DIRECTION | RIGHT-HAND | | MATERIAL | STEEL BODY | | PAPER FILTERING MEDIUM | | RUBBER SYNTHETIC SEAL | | SURFACE TREATMENT | PAINT BODY | | FILTERING MEDIA DESIGN | PLEATED SINGLE FILTERING MEDIA RESPONSE | | DESIGN TYPE | NONREUSABLE | | FLOW DIRECTION | OUTSIDE IN | | MEDIA FOR WHICH DESIGNED | FUEL/OIL, HYDROCARBON | | TEMP RATING | -30.0 DEG CELSIUS MINIMUM AND | | 120.0 DEG CELSIUS MAXIMUM | | DROP PRESSURE | 550.0 KILOPASCALS | | FILTERING SYSTEM FOR WHICH DESIGNED | FULL FLOW | | FEATURES PROVIDED | BY-PASS VALVE | | SPECIAL FEATURES | 50.0 PSID BY-PASS SETTING; BETA RATIO FILTRATION RATING |
|
|