|
|
|
National Stock Number:
2940-01-413-3686
Federal Supply Class:
2940
National Item Identification Number:
014133686
Description:
FILTER ELEMENT,FLUID
Detail:
A replaceable device designed to remove solid particles from fluids ranging in density from heavy liquids to gases. The removal of particles is accomplished by porous material (metallic or non-metallic), stacked disks, wound wire, or the like, constructed so the fluid can flow through the device while the solid particles are retained. It may be designed to fit into a FILTER, FLUID (or similar cavity), or it may have an integral outer casing and mounting facilities and be designed to connect directly to an engine, compressor, or the like. The degree of removal of particles must be nominally rated at less than 50 microns or absolutely rated at less than 75 microns. Excludes FILTER ELEMENT, AIR CONDITIONING. See also STRAINER ELEMENT, SEDIMENT.
|
Manufacturer Information:
| 2743290 | 89749 | CLARK MATERIAL HANDLING COMPANY | | 899839 | 89749 | CLARK MATERIAL HANDLING COMPANY | | 91D535 | 89749 | CLARK MATERIAL HANDLING COMPANY |
|
Techincal Specification:
| DROP PRESSURE | 35.0 POUNDS PER SQUARE INCH | | BODY DIAMETER | 93.22 MILLIMETERS NOMINAL | | BODY OVERALL LENGTH | 139.7 MILLIMETERS NOMINAL | | DESIGN TYPE | NONREUSABLE | | FILTERING MEDIA DESIGN | ENCASED SINGLE FILTERING MEDIA RESPONSE | | FILTERING SYSTEM FOR WHICH DESIGNED | BY-PASS FLOW | | FILTRATION RATING IN MICRONS | 25.0 NOMINAL | | FLOW DIRECTION | OUTSIDE IN | | MATERIAL | RUBBER BUNA N SEAL | | MATERIAL | STEEL BODY | | MEDIA FOR WHICH DESIGNED | FUEL/OIL, HYDROCARBON | | NOMINAL THREAD SIZE | 0.750 INCHES | | STYLE DESIGNATOR | CYLINDRICAL W/ INTEGRAL OUTER CASING | | TEMP RATING | -10.0 CELSIUS MINIMUM AND 100.0 CELSIUS MAXIMUM | | THREAD SERIES DESIGNATOR | UNF |
|
|