|
|
|
National Stock Number:
2940-01-088-0350
Federal Supply Class:
2940
National Item Identification Number:
010880350
Description:
FILTER ELEMENT,FLUID
Detail:
A replaceable device designed to remove solid particles from fluids ranging in density from heavy liquids to gases. The removal of particles is accomplished by porous material (metallic or non-metallic), stacked disks, wound wire, or the like, constructed so the fluid can flow through the device while the solid particles are retained. It may be designed to fit into a FILTER, FLUID (or similar cavity), or it may have an integral outer casing and mounting facilities and be designed to connect directly to an engine, compressor, or the like. The degree of removal of particles must be nominally rated at less than 50 microns or absolutely rated at less than 75 microns. Excludes FILTER ELEMENT, AIR CONDITIONING. See also STRAINER ELEMENT, SEDIMENT.
|
Manufacturer Information:
| A8031-018 | 05842 | DYNEX/RIVETT INC. |
|
Techincal Specification:
| MANUFACTURERS CODE | 05842 | | DESIGN CONTROL REFERENCE | A8031-018 | | SMALLEST OUTSIDE DIAMETER | 0.421 INCHES NOMINAL | | LARGEST OUTSIDE DIAMETER | 0.609 INCHES MINIMUM AND | | 0.615 INCHES MAXIMUM | | BODY OVERALL LENGTH | 3.000 INCHES NOMINAL | | MATERIAL | STEEL CORROSION RESISTING CONTAINER/CARTRIDGE | | STEEL CORROSION RESISTING FILTERING MEDIUM | | FILTERING MEDIA DESIGN | WOVEN SINGLE FILTERING MEDIA RESPONSE | | FILTRATION RATING IN MICRONS | 21.0 ABSOLUTE AND | | 12.0 NOMINAL | | FLOW DIRECTION | OUTSIDE IN | | DIFFERENTIAL PRESSURE | 100.0 POUNDS PER SQUARE INCH | | THE MANUFACTURERS DATA | |
|
|