| ANGULAR DEVIATION OF FIRST HOLE FROM TOP CENTER IN DEG | 170.0 |
| ANGULAR DEVIATION OF SECOND HOLE FROM FIRST HOLE IN DEG | 170.0 |
| BOTTOM MOUNTING HOLE DIAMETER | 0.453 INCHES MINIMUM AND 0.469 INCHES MAXIMUM |
| DISTANCE BETWEEN INSIDE SURFACES OF HINGE BRACKET | 7.281 INCHES MINIMUM AND 7.332 INCHES MAXIMUM |
| DISTANCE BETWEEN OUTSIDE SURFACES OF HINGE BRACKET | 8.471 INCHES MINIMUM AND 8.548 INCHES MAXIMUM |
| DISTANCE BETWEEN SHAFT CENTER AND BOTTOM MOUNTING HOLE CENTER | 5.200 INCHES NOMINAL |
| DISTANCE BETWEEN SHAFT CENTER AND TOP MOUNTING HOLE CENTER | 5.200 INCHES NOMINAL |
| ENVIRONMENTAL PROTECTION | FUNGUS RESISTANT |
| GROUNDING METHOD | EXTERNAL |
| KEYWAY LENGTH | 0.990 INCHES MINIMUM AND 1.000 INCHES MAXIMUM |
| KEYWAY WIDTH | 0.250 INCHES MINIMUM AND 0.251 INCHES MAXIMUM |
| MAXIMUM OUTPUT CURRENT RATING IN AMPS | 200.0 |
| MAXIMUM RATED ARMATURE SPEED IN RPM | 8000 |
| MOUNTING HOLE THREAD CLASS | 2B |
| MOUNTING HOLE THREAD DIAMETER | 0.375 INCHES NOMINAL |
| MOUNTING HOLE THREAD DIRECTION | RIGHT-HAND |
| MOUNTING HOLE THREAD QUANTITY PER INCH | 16 |
| MOUNTING HOLE THREAD SERIES DESIGNATOR | UNIFIED NATIONAL COARSE (UNC) |
| MOUNTING STYLE | BRACKET MTD W/THREE MTG HOLES, TOP HOLE THREADED |
| SHAFT DRIVE END STYLE | STRAIGHT SHAFT END, THREADED, W/KEYWAY |
| SHAFT ROTATION DIRECTION | CLOCKWISE |
| SUBMERSIBILITY | NONSUBMERSIBLE |
| THREAD CLASS | 3A |
| THREAD DIAMETER | 0.750 INCHES NOMINAL |
| THREAD DIRECTION | RIGHT-HAND |
| THREAD QUANTITY PER INCH | 16 |
| THREAD SERIES | UNF |
| VOLTAGE IN VOLTS | 28.0 |