|
|
|
National Stock Number:
2920-01-301-9912
Federal Supply Class:
2920
National Item Identification Number:
013019912
Description:
GENERATOR,ENGINE ACCESSORY
Detail:
A generator primarily designed to be mounted on an internal combustion engine, and to be driven by the engine to keep the battery in a charged condition. May also supply current for the engine ignition system and/or electrical equipment which is connected to the battery circuit. Includes alternating current generators designed for use with a rectifier. Excludes the major generator of GENERATING SETS. For generators specifically designed for aircraft use and not mounted on the engine, see GENERATOR, DIRECT CURRENT.
|
Manufacturer Information:
| A5T21077 | J4300 | MITSUBISHI ELECTRIC CORPORATION | | A5T21077 | J4314 | MITSUBISHI ELECTRIC CORPRATION | | A8083 | 63632 | DELPHI POWERTRAIN SYSTEMS, LLC | | MD064068 | 6T229 | MACHINERY DISTRIBUTION INC | | A5T21077 | J4925 | MITSUBISHI ELECTRIC CORPORATION | | A5T21077 | S0319 | MITSUBISHI ELECTRIC CORPORATION |
|
Techincal Specification:
| ANGULAR DEVIATION OF FIRST HOLE FROM TOP CENTER IN DEG | 0.0 | | ARMATURE MINIMUM SPEED IN RPM AT FULL CURRENT OUTPUT | 1300 | | DISTANCE BETWEEN INSIDE SURFACES OF HINGE BRACKET | 55.0 MILLIMETERS NOMINAL | | DISTANCE BETWEEN OUTSIDE SURFACES OF HINGE BRACKET | 84.0 MILLIMETERS NOMINAL | | FURNISHED ITEMS | DRIVE PULLEY | | GROUND POLARITY TYPE | NEGATIVE | | MAXIMUM RATED ARMATURE SPEED IN RPM | 2500 | | RECTIFIER LOCATION | INTEGRAL | | MOUNTING HOLE THREAD DIRECTION | RIGHT-HAND | | MOUNTING HOLE THREAD SERIES DESIGNATOR | ISO M | | MOUNTING STYLE | BRACKET MTD W/THREE MTG HOLES, TOP HOLE THREADED | | SHAFT DRIVE END STYLE | STRAIGHT SHAFT END, THREADED | | SHAFT ROTATION DIRECTION | CLOCKWISE | | SUBMERSIBILITY | SUBMERSIBLE OR NONSUBMERSIBLE | | VOLTAGE IN VOLTS | 12.0 |
|
|