|
|
|
National Stock Number:
2920-00-913-4532
Federal Supply Class:
2920
National Item Identification Number:
009134532
Description:
GENERATOR,ENGINE ACCESSORY
Detail:
A generator primarily designed to be mounted on an internal combustion engine, and to be driven by the engine to keep the battery in a charged condition. May also supply current for the engine ignition system and/or electrical equipment which is connected to the battery circuit. Includes alternating current generators designed for use with a rectifier. Excludes the major generator of GENERATING SETS. For generators specifically designed for aircraft use and not mounted on the engine, see GENERATOR, DIRECT CURRENT.
|
Manufacturer Information:
| 1117756 | 1LW55 | BORGWARNER PDS (ANDERSON), L.L.C. | | 1117769 | 16764 | GENERAL MOTORS CORP DELCO REMY DIV | | 1117769 | 1LW55 | BORGWARNER PDS (ANDERSON), L.L.C. | | 1117769 | 24617 | GENERAL MOTORS CORP | | 1117769 | 30379 | EUCLID INC | | 1117769 | 61928 | GENERAL MOTORS CORP AC-DELCO DIV GOVERNMENT ORDER DEPT | | 9L1841 | 11083 | CATERPILLAR INC | | 215010H1 | 31007 | NAVISTAR INTL CORP | | 17620F | 45152 | OSHKOSH CORP | | 17620F | 75Q65 | OSHKOSH DEFENSE LLC | | 1117769 | 7X677 | GENERAL MOTORS LLC | | 1117769 | 92679 | NAVISTAR INTL CORP MELROSE PARK ENGINE PLANT LOCATION /MELROSE PARK/ | | 215010H1 | 92679 | NAVISTAR INTL CORP MELROSE PARK ENGINE PLANT LOCATION /MELROSE PARK/ | | 1A-0070 | 92860 | INTERNATIONAL PRODUCTS AND MANUFACTURING CO DES PLAINES IL |
|
Techincal Specification:
| ANGULAR DEVIATION OF FIRST HOLE FROM TOP CENTER IN DEG | 180.0 | | BOTTOM MOUNTING HOLE DIAMETER | 0.451 INCHES NOMINAL | | DISTANCE BETWEEN INSIDE SURFACES OF HINGE BRACKET | 3.965 INCHES NOMINAL | | DISTANCE BETWEEN OUTSIDE SURFACES OF HINGE BRACKET | 5.105 INCHES NOMINAL | | DISTANCE BETWEEN SHAFT CENTER AND BOTTOM MOUNTING HOLE CENTER | 3.830 INCHES NOMINAL | | ENVIRONMENTAL PROTECTION | CORROSION RESISTANT | | KEYWAY LENGTH | 0.750 INCHES NOMINAL | | KEYWAY WIDTH | 0.156 INCHES NOMINAL | | MAXIMUM OUTPUT CURRENT RATING IN AMPS | 62.0 | | RECTIFIER LOCATION | INTEGRAL | | MOUNTING STYLE | BRACKET MTD W/TWO MTG HOLES | | SECOND STEP DIAMETER | 0.873 INCHES MINIMUM AND 0.874 INCHES MAXIMUM | | SHAFT DRIVE END STYLE | STRAIGHT SHAFT END, THREADED, W/KEYWAY | | SHAFT ROTATION DIRECTION | CLOCKWISE OR COUNTERCLOCKWISE | | THREAD CLASS | 2A | | THREAD DIAMETER | 0.625 INCHES NOMINAL | | THREAD DIRECTION | RIGHT-HAND | | THREAD LENGTH | 0.814 INCHES NOMINAL | | THREAD QUANTITY PER INCH | 18 | | THREAD SERIES | UNF | | UNTHREADED PORTION LENGTH | 1.320 INCHES NOMINAL | | VOLTAGE IN VOLTS | 12.0 |
|
|