| SHIELD THREAD LENGTH | 0.375 INCHES NOMINAL |
| SPECIAL FEATURES | GRUMMAN AEROSPACE CORP A10 AIRCRAFT |
| WIDTH ACROSS FLATS | 0.802 INCHES MINIMUM AND 0.817 INCHES MAXIMUM |
| TERMINAL SLEEVE INSIDE DIAMETER | 0.301 INCHES MINIMUM AND 0.306 INCHES MAXIMUM |
| TEST DATA DOCUMENT | 81348-WS506 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). AND 96906-7524258 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) |
| THREAD SIZE AND SERIES/TYPE DESIGNATOR AND LOCATION | 14-1.25MM BASE ERR-100 |
| THREAD SIZE AND SERIES/TYPE DESIGNATOR AND LOCATION | 5/8-24 UNEF SHIELDING ERR-100 |
| TOP TO SHIELD THREAD DISTANCE | 0.094 INCHES MINIMUM AND 0.156 INCHES MAXIMUM |
| TOP TO TERMINAL CONTACT DISTANCE | 1.270 INCHES NOMINAL |
| USAGE DESIGN | ENGINE OTHER THAN AIRCRAFT |
| ELECTRODE STYLE | SINGLE FLAT SHELL GROUND ELECTRODE (SEE ALSO STYLE 4) |
| BARREL INSIDE DIAMETER | 0.505 INCHES MINIMUM AND 0.510 INCHES MAXIMUM |
| BODY STYLE | ELECTRICALLY SHIELDED, PARTIAL INSULATOR, GASKET SEAT |
| DC RESISTANCE RATING IN OHMS | 10000.0 NOMINAL |
| HEIGHT ABOVE MOUNTING SURFACE | 2.875 INCHES NOMINAL |
| PROPRIETARY CHARACTERISTICS | PACS |
| MEAN EFFECTIVE PRESSURE RATING | 200.0 POUNDS PER SQUARE INCH NOMINAL |
| NONDEFINITIVE SPEC/STD DATA | 1 TYPE AND A CLASS |
| REACH LENGTH | 0.360 INCHES MINIMUM AND 0.390 INCHES MAXIMUM |
| SEAT MAJOR DIAMETER | 0.785 INCHES MINIMUM AND 0.800 INCHES MAXIMUM |