| ELECTRODE STYLE | SINGLE FLAT SHELL GROUND ELECTRODE (SEE ALSO STYLE 4) |
| BARREL INSIDE DIAMETER | 0.505 INCHES MINIMUM AND 0.510 INCHES MAXIMUM |
| BODY STYLE | ELECTRICALLY SHIELDED, PARTIAL INSULATOR, GASKET SEAT |
| DC RESISTANCE RATING IN OHMS | 7500.0 MINIMUM AND 15000.0 MAXIMUM |
| HEIGHT ABOVE MOUNTING SURFACE | 2.875 INCHES MAXIMUM |
| PROPRIETARY CHARACTERISTICS | PACS |
| MEAN EFFECTIVE PRESSURE RATING | 155.0 POUNDS PER SQUARE INCH NOMINAL |
| NONDEFINITIVE SPEC/STD DATA | 1 TYPE AND A CLASS |
| REACH LENGTH | 0.375 INCHES NOMINAL |
| SEAT MAJOR DIAMETER | 0.790 INCHES NOMINAL |
| SHIELD THREAD LENGTH | 0.438 INCHES NOMINAL |
| SPECIAL FEATURES | WATERPR00F-ZER0 LEAKAGE DESIGN |
| WIDTH ACROSS FLATS | 0.812 INCHES NOMINAL |
| TERMINAL SLEEVE INSIDE DIAMETER | 0.301 INCHES MINIMUM AND 0.316 INCHES MAXIMUM |
| TEST DATA DOCUMENT | 81348-WS506 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). |
| THREAD SIZE AND SERIES/TYPE DESIGNATOR AND LOCATION | 14-1.25MM BASE ERR-100 |
| THREAD SIZE AND SERIES/TYPE DESIGNATOR AND LOCATION | 5/8-24 UNEF SHIELDING ERR-100 |
| TOP TO TERMINAL CONTACT DISTANCE | 1.120 INCHES MINIMUM AND 1.310 INCHES MAXIMUM |
| TOP TO SHIELD THREAD DISTANCE | 0.125 INCHES NOMINAL |
| USAGE DESIGN | ENGINE OTHER THAN AIRCRAFT |