|
|
|
National Stock Number:
2915-01-184-9013
Federal Supply Class:
2915
National Item Identification Number:
011849013
Description:
FILTER ELEMENT,FLUID
Detail:
A replaceable device designed to remove solid particles from fluids ranging in density from heavy liquids to gases. The removal of particles is accomplished by porous material (metallic or non-metallic), stacked disks, wound wire, or the like, constructed so the fluid can flow through the device while the solid particles are retained. It may be designed to fit into a FILTER, FLUID (or similar cavity), or it may have an integral outer casing and mounting facilities and be designed to connect directly to an engine, compressor, or the like. The degree of removal of particles must be nominally rated at less than 50 microns or absolutely rated at less than 75 microns. Excludes FILTER ELEMENT, AIR CONDITIONING. See also STRAINER ELEMENT, SEDIMENT.
|
Manufacturer Information:
| 217111 | 00736 | FALLS FILTRATION TECHNOLOGIES, INC. | | 217111 | 18350 | PALL AEROPOWER CORPORATION | | R9W2147 | 00736 | FALLS FILTRATION TECHNOLOGIES, INC. | | 26658 | 10989 | PALL AEROPOWER CORP SUB OF PALL CORP MECTRON INDUSTRIES DIV | | 26658 | 18350 | PALL AEROPOWER CORPORATION | | 217111 | 59875 | EATON CORP |
|
Techincal Specification:
| DROP PRESSURE | ERR-060 | | BODY DIAMETER | 1.192 INCHES NOMINAL | | BODY OVERALL LENGTH | 1.492 INCHES MINIMUM AND 1.532 INCHES MAXIMUM | | DESIGN TYPE | LIMITED | | DIFFERENTIAL PRESSURE | ERR-060 | | FILTERING MEDIA DESIGN | MESH FIRST FILTERING MEDIA RESPONSE | | FILTERING MEDIA DESIGN | MESH OR SINTERED SECOND FILTERING MEDIA RESPONSE | | FILTERING MEDIA DESIGN | MESH OR SINTERED THIRD FILTERING MEDIA RESPONSE | | FILTRATION RATING IN MICRONS | 45.0 ABSOLUTE | | FLOW DIRECTION | OUTSIDE IN | | MATERIAL | ALUMINUM ALLOY 6061 BODY | | MATERIAL | STEEL CORROSION RESISTING FILTERING MEDIUM | | MEDIA FOR WHICH DESIGNED | FUEL/OIL, HYDROCARBON | | NOMINAL THREAD SIZE | 1.3125 INCHES | | SPECIAL FEATURES | 3 FILTERING SCREENS: 50X50 DRAINAGE SCREEN; 84X84 BACKING MESH,325X325 FACING MESH,SINTERED ASSY; USED ON MAIN FUEL PUMP,708000,F100 ACFT ENG | | STYLE DESIGNATOR | CYLINDRICAL W/INTEGRAL OUTER CASING | | SURFACE TREATMENT | ANODIZE BODY | | SURFACE TREATMENT | PASSIVATE FILTERING MEDIUM | | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL JOINT (UNJ) |
|
|