|
|
|
National Stock Number:
2910-01-355-1256
Federal Supply Class:
2910
National Item Identification Number:
013551256
Description:
FILTER ELEMENT,FLUID
Detail:
A replaceable device designed to remove solid particles from fluids ranging in density from heavy liquids to gases. The removal of particles is accomplished by porous material (metallic or non-metallic), stacked disks, wound wire, or the like, constructed so the fluid can flow through the device while the solid particles are retained. It may be designed to fit into a FILTER, FLUID (or similar cavity), or it may have an integral outer casing and mounting facilities and be designed to connect directly to an engine, compressor, or the like. The degree of removal of particles must be nominally rated at less than 50 microns or absolutely rated at less than 75 microns. Excludes FILTER ELEMENT, AIR CONDITIONING. See also STRAINER ELEMENT, SEDIMENT.
|
Manufacturer Information:
| 33439 | 79396 | WIX CORP | | FS-1215 | 33457 | CUMMINS FILTRATION INC | | FS-1225 | 33457 | CUMMINS FILTRATION INC | | FS0122500 | 33457 | CUMMINS FILTRATION INC | | TP-1003 | 70040 | GENERAL MOTORS CORP AC ROCHESTER DIV |
|
Techincal Specification:
| STYLE DESIGNATOR | CYLINDRICAL W/ INTEGRAL OUTER CASING | | BODY DIAMETER | 3.698 INCHES MINIMUM AND | | 3.820 INCHES MAXIMUM | | BODY OVERALL LENGTH | 7.870 INCHES MINIMUM AND | | 8.419 INCHES MAXIMUM | | THREAD SERIES DESIGNATOR | UNS | | NOMINAL THREAD SIZE | 1.000 INCHES | | MATERIAL | STEEL BODY | | PAPER AND | | RESIN SYNTHETIC FILTERING MEDIUM | | RUBBER SYNTHETIC SEAL | | SURFACE TREATMENT | PAINT BODY | | FILTERING MEDIA DESIGN | PLEATED SINGLE FILTERING MEDIA RESPONSE | | DESIGN TYPE | NONREUSABLE | | MEDIA FOR WHICH DESIGNED | FUEL/OIL, HYDROCARBON | | FILTERING SYSTEM FOR WHICH DESIGNED | FULL FLOW | | FEATURES PROVIDED | DRAIN COCK |
|
|