| MATERIAL | ALUMINUM ALLOY 5083 OR |
| ALUMINUM ALLOY 5086 |
| MATERIAL DOCUMENT AND CLASSIFICATION | QQ-A 250/6 FED SPEC SINGLE MATERIAL RESPONSE OR |
| QQ-A 250/7 FED SPEC SINGLE MATERIAL RESPONSE |
| SURFACE TREATMENT | CHEMICAL AND |
| PRIMER-HEXAVALENT CHROMIUM FREE OR |
| ANODIZE AND |
| NON-CHROMIC ACID RINSE OR |
| SULFURIC ACID |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL DTL 5541,TYPE 2,CLASS 1A MIL STD SINGLE TREATMENT RESPONSE OR |
| MIL DTL 81706,TYPE 2,CLASS 1A MIL STD SINGLE TREATMENT RESPONSE AND |
| MIL-A 8625,TYPE 1C OR TYPE II,CLASS 1 MIL STD SINGLE TREATMENT RESPONSE |
| END ITEM NAME | OIL COOLER |
| MOUNTING METHOD | BOLTED OR |
| SCREW |
| OVERALL LENGTH | 18.00 INCHES NOMINAL |
| OVERALL WIDTH | 7.19 INCHES NOMINAL |
| MOUNTING HOLE TYPE | THRU HOLE ALL HOLES |
| MOUNTING HOLE QUANTITY | 9 |
| VEHICLE DESIGN CONTROL ACTIVITY | 0MLM6 |
| VEHICLE IDENTIFICATION DESIGNATOR | AAVC7A1-RAM/RS |
| MINIMUM TENSILE STRENGTH | 40000 POUNDS PER SQUARE INCH |
| MINIMUM YIELD STRENGTH | 24000 POUNDS PER SQUARE INCH |
| HEAT TREATMENT | H-321 STRAIN HARDENED OR |
| H-32 STRAIN HARDENED, STABILIZED TO 1/4 HARD |
| NOMINAL HOLE DIAMETER AND QUANTITY | 0.375 INCHES FOUR HOLES AND |
| 0.530 INCHES FOUR HOLES AND |
| 0.200 INCHES ONE HOLE |
| PART NAME ASSIGNED BY CONTROLLING AGENCY | BRACKET,OIL COOLER SUPPORT |