| DISPLACEMENT TYPE | VARIABLE |
| SHAFT ROTATION DIRECTION | CLOCKWISE |
| OPERATING SPEED AT RATED CAPACITY IN RPM | 5800.0 |
| CONSTANT DISPLACEMENT PER REVOLUTION | 0.158 CUBIC INCHES |
| CONNECTION TYPE | INLET |
| MOUNTING TYPE | STANDARD |
| CONNECTION QUANTITY | 1 |
| CONNECTION DESIGN | THREADED |
| DRIVE SHAFT TYPE | SPLINED, INVOLUTE EXTERNAL |
| MATERIAL | ALUMINUM ALLOY HOUSING |
| SURFACE TREATMENT | PAINT HOUSING |
| MAXIMUM WORKING PRESSURE RATING AT SPECIFIED TEMP RANGE | 90 PSIG AT 250F |
| VEHICLE IDENTIFICATION DESIGNATOR | M1A2 |
| BOLT HOLE QUANTITY | 4 |
| BOLT CIRCLE DIAMETER | 0.41 INCHES NOMINAL |
| BOLT HOLE SPACING | 1IN ON SIDE AND 1.625 ON TOP |
| THREAD SIZE | 10 |
| SCREW THREAD SERIES DESIGNATOR | UNC |
| THREAD LOCATION | INTERNAL |
| THREAD DIRECTION | RIGHT-HAND |
| SHAFT DIAMETER | 1.125 INCHES NOMINAL |
| SPLINE QUANTITY | 1 |
| SPLINE MAJOR DIAMETER | 0.62 INCHES NOMINAL |
| SPLINE MINOR DIAMETER | 0.50 INCHES NOMINAL |
| SPLINE PITCH | 32/64 |
| PITCH DIAMETER | 0.547 INCHES NOMINAL |
| SPLINE PRESSURE ANGLE IN DEG | 45.0 |
| SPLINE LENGTH | 0.50 INCHES NOMINAL |
| MEDIA FOR WHICH DESIGNED | HYDRAULIC FLUID |
| PROOF PRESSURE | 2625.0 POUNDS PER SQUARE INCH GAGE INLET |
| 125.0 POUNDS PER SQUARE INCH GAGE DISCHARGE |
| BURST PRESSURE | 4000.0 PRESSURE POUNDS PER SQUARE INCH GAGE INLET |
| 250.0 PRESSURE POUNDS PER SQUARE INCH GAGE DISCHARGE |
| OPERATING PRESSURE | 1650.0 POUNDS PER SQUARE INCH GAGE MAXIMUM INLET |
| 90.0 POUNDS PER SQUARE INCH GAGE MAXIMUM DISCHARGE |
| TEMP RANGE | -25.0 TO 250.0 DEG FAHRENHEIT |
| PART NAME ASSIGNED BY CONTROLLING AGENCY | MOTOR,HYDRAULIC,FAN |