|
|
|
National Stock Number:
2520-01-421-4588
Federal Supply Class:
2520
National Item Identification Number:
014214588
Description:
SHAFT,AXLE,AUTOMOTIVE
Detail:
A SHAFT WHICH IS A COMPONENT OF AXLE ASSEMBLY, AUTOMOTIVE, DRIVING, USED TO TRANSMIT ROTARY MOTION FROM THE DIFFERENTIAL ASSEMBLY EITHER DIRECTLY OR INDIRECTLY TO THE WHEEL HUBS. EXCLUDES SHAFTS WITH A UNIVERSAL JOINT OR A COMPONENT OF A UNIVERSAL JOINT ATTACHED TO IT.
|
Manufacturer Information:
| 2520014214588 | A00AM | E.C.A ETABLISSEMENT CENTRAL DESAPPROVISIONNEMENTS DES FORCES ARMEE | | 2520PL0644299 | 9009H | INSPEKTORAT WSPARCIA SIL ZBROJNYCH | | RCSK17028-3 | 34623 | AM GENERAL LLC | | XA13962 | 62826 | GKN DRIVELINE NORTH AMERICA INC. | | 299-0050 | 62826 | GKN DRIVELINE NORTH AMERICA INC. |
|
Techincal Specification:
| FIRST END BEARING SEAT | NOT INCLUDED | | FIRST END TYPE | FLANGED | | FLANGE OUTSIDE DIAMETER | 3.539 INCHES MINIMUM AND 3.543 INCHES MAXIMUM | | FLANGE OVERALL THICKNESS | 0.335 INCHES NOMINAL | | FLANGE THICKNESS AT MOUNTING HOLE | 0.200 INCHES NOMINAL | | HOLE DIAMETER | 0.430 INCHES MINIMUM AND 0.450 INCHES MAXIMUM | | OVERALL LENGTH | 26.050 INCHES NOMINAL | | METALLIC HARDNESS RATING | 50.0 NOMINAL ROCKWELL C | | MOUNTING FACILITY TYPE AND QUANTITY | 6 UNTHREADED HOLE(S) | | SECOND END BEARING SEAT | NOT INCLUDED | | SECOND END TYPE | SPLINED | | SECOND END PITCH DIAMETER | 1.3333 INCHES NOMINAL | | SECOND END SPLINE LENGTH | 2.440 INCHES NOMINAL | | SECOND END SPLINE PRESSURE ANGLE IN DEG | 45.0 | | SECOND END SPLINE QUANTITY | 32 | | SECOND END SPLINE TYPE | INVOLUTE | | SPECIAL FEATURES | USED ON LEFT FRONT SIDE |
|
|