| AFTER BEARING SLEEVE LENGTH | 7.364 FEET NOMINAL |
| AFTER BEARING SLEEVE OUTSIDE DIAMETER | 18.000 INCHES NOMINAL |
| AFTER END DESIGN | TAPERED |
| CONSTRUCTION | HOLLOW |
| COVERING LOCATION | ALL EXPOSED SURFACES COVERED |
| DEPTH | 0.875 INCHES NOMINAL |
| FORWARD BEARING SLEEVE LENGTH | 5.417 FEET NOMINAL |
| FORWARD BEARING SLEEVE OUTSIDE DIAMETER | 18.000 INCHES NOMINAL |
| FORWARD END DESIGN | TAPERED |
| FORWARD END TAPER LENGTH | 2.323 FEET NOMINAL |
| FORWARD END TAPER MAJOR DIAMETER | 18.750 INCHES NOMINAL |
| FORWARD END TAPER | 1.000 PER FOOT IN INCHES NOMINAL |
| FURNISHED ITEMS AND QUANTITY | PROPELLER NUT,1; PROPELLER KEY,2 |
| INSIDE DIAMETER | 4.250 INCHES MINIMUM AND 11.250 INCHES MAXIMUM |
| KEYWAY DEPTH | 0.875 INCHES NOMINAL |
| KEYWAY QUANTITY | 2 |
| KEYWAY WIDTH | 1.875 INCHES NOMINAL |
| MAJOR DIAMETER | 9.000 INCHES NOMINAL |
| MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-890, CLASS AN MIL SPEC SINGLE MATERIAL RESPONSE |
| MATERIAL | STEEL |
| PROTECTIVE COVERING TYPE | RUBBER |
| QUANTITY | 2 |
| REFERENCE NUMBER DIFFERENTIATING CHARACTERISTICS | CPTF,CPTG,CPTH,CPTP,FEAT,AND W/O PROTECTION RINGS,PC 107 AND 108 |
| OUTSIDE DIAMETER | 16.500 INCHES NOMINAL |
| OVERALL LENGTH | 52.281 FEET NOMINAL |
| SPECIAL FEATURES | COLD ROLLED IN PROPELLER TAPER AND AFTER END OF SLEEVE AREA |
| SURFACE FINISH | SMOOTH MACHINED |
| TAPER LENGTH | 4.125 FEET NOMINAL |
| TAPER MAJOR DIAMETER | 16.500 INCHES NOMINAL |
| TAPER | 1.000 PER FOOT IN INCHES NOMINAL |
| THREAD QUANTITY | 4 PER INCH |
| THREAD LENGTH | 8.500 INCHES |
| UNIT TYPE | PROPELLER SHAFT SECTION |
| USAGE DESIGN | SUITABLE FOR DD692 CLASS |
| USAGE LOCATION | PORT/STARBOARD |
| WIDTH | 1.875 INCHES NOMINAL |