| AFTER BEARING SLEEVE LENGTH | 4.688 FEET NOMINAL |
| AFTER BEARING SLEEVE OUTSIDE DIAMETER | 7.750 INCHES NOMINAL |
| AFTER END DESIGN | TAPERED |
| CONSTRUCTION | HOLLOW |
| COVERING LOCATION | SURFACES BETWEEN BEARING SLEEVE COVERED |
| DEPTH | 0.515625 INCHES NOMINAL |
| FORWARD BEARING SLEEVE LENGTH | 3.688 FEET NOMINAL |
| FORWARD BEARING SLEEVE OUTSIDE DIAMETER | 7.750 INCHES NOMINAL |
| FORWARD END DESIGN | STRAIGHT |
| FORWARD END DIAMETER | 7.000 INCHES NOMINAL |
| FURNISHED ITEMS AND QUANTITY | PROPELLER NUT,1; PROPELLER KEY,2 |
| INSIDE DIAMETER | 4.000 INCHES NOMINAL |
| INTERMEDIATE BEARING SLEEVE LENGTH | 3.547 FEET NOMINAL |
| INTERMEDIATE BEARING SLEEVE OUTSIDE DIAMETER | 7.750 INCHES NOMINAL |
| MAJOR DIAMETER | 4.500 INCHES NOMINAL |
| MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-890,FORGED MIL SPEC SINGLE MATERIAL RESPONSE |
| MATERIAL | STEEL |
| PROTECTIVE COVERING TYPE | RUBBER |
| QUANTITY | 2 |
| REFERENCE NUMBER DIFFERENTIATING CHARACTERISTICS | AS DIFFERENTIATED BY UNIT TYPE |
| OUTSIDE DIAMETER | 7.000 INCHES NOMINAL |
| OVERALL LENGTH | 48.145 FEET NOMINAL |
| SURFACE FINISH | SMOOTH MACHINED |
| TAPER LENGTH | 1.312 FEET NOMINAL |
| TAPER MAJOR DIAMETER | 7.000 INCHES NOMINAL |
| TAPER | 1.000 PER FOOT IN INCHES NOMINAL |
| THREAD QUANTITY | 4 PER INCH |
| THREAD LENGTH | 4.500 INCHES |
| UNIT TYPE | PROPELLER SHAFT SECTION |
| USAGE LOCATION | PORT/STARBOARD |
| WIDTH | 1.324 INCHES NOMINAL |