|
|
|
National Stock Number:
1680-01-476-4646
Federal Supply Class:
1680
National Item Identification Number:
014764646
Description:
ELBOW,TUBE,AIRCRAFT
|
Manufacturer Information:
| 110-191-12 | 97499 | BELL TEXTRON INC |
|
Techincal Specification:
| BEND CENTER TO CENTER NOMINAL DISTANCE | 1.004 INCHES | | CRITICALITY CODE JUSTIFICATION | AGAV | | FLOW ANGLE | 45.0 DEGREES | | PART NAME ASSIGNED BY CONTROLLING AGENCY | FITTING,ELBOW,45(DEGREES),DYNAMIC BEAM SEAL,SWIVEL NUT,5000PSI | | MATERIAL | STEEL COMP 302 TUBE | | MATERIAL | TITANIUM ALLOY BODY | | MATERIAL | TITANIUM ALLOY NUT | | MAXIMUM OPERATING TEMP | 275.0 FAHRENHEIT SECOND RESPONSE | | MAXIMUM OPERATING TEMP | -65.0 FAHRENHEIT FIRST RESPONSE | | NOMINAL THREAD SIZE | 1.000 INCHES FIRST END | | NOMINAL WIDTH ACROSS FLATS | 1.125 INCHES FIRST END | | OPERATING PRESSURE | 5000.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM SINGLE RESPONSE | | SPECIAL TEST FEATURES | TUBE SIZE: .750",OPERATING PRESSURE: 5,000PSI, PROOF PRESSURE: 10,000PSI, BURST PRESSURE: 20,000PSI, OPERATING TEMPERATURE RANGE: -65F TO 275F | | SUPPLEMENTARY FEATURES | MATERIAL: NUT, 6AL-4V TITANIUM PER AMS 4965,BODY:6AL-4V TITANIUM PER AMS 4965, WIRE: 302 CRES PER AMS 5637, FINISH: NUT, COATED INTERNALLY WITH SOLID FILM LUBE PER MIL-L-46010 TYPE I, BODY: CONCAVE SEALING SURFACE ON MALE END COATED WITH SOLID FILM LUBE PER MIL-L-46010 TYPE I, WIRE: COATED WITH SOLID FILM LUBE PER MIL-L-46010 TYPE I | | SURFACE TREATMENT | LUBRICANT BODY | | SURFACE TREATMENT | LUBRICANT NUT | | SURFACE TREATMENT | LUBRICANT TUBE | | THREAD QUANTITY PER INCH | 16 FIRST END | | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL JOINT (UNJ) FIRST END |
|
|