|
|
|
National Stock Number:
1680-00-906-6427
Federal Supply Class:
1680
National Item Identification Number:
009066427
Description:
LEVER,REMOTE CONTROL
Detail:
A rigid item usually in the form of an arm of various shapes and cross sections, containing two or more holes so spaced that one serves as a pivot with or without hubs and must have a definite means for securing to a shaft (such as threaded hole for set-screw, keyway(s), splines, serrations or some clamping device). The other hole(s) connect(s) to CONNECTING LINK, RIGID; WIRE ROPE ASSEMBLY, SINGLE LEG; or CLEVIS, ROD END; to provide transmission of movement to other parts of the mechanism. See also BELL CRANK. For manually operated items see LEVER, MANUAL CONTROL.
|
Manufacturer Information:
| 540-011-308-5 | 80070 | LOCKHEED MARTIN CORPORATION | | 540-011-308-5 | 97499 | BELL TEXTRON INC |
|
Techincal Specification:
| BORE TYPE | SPLINED | | CENTER TO CENTER DISTANCE BETWEEN LINK AND SHAFT HOLES | 3.050 INCHES NOMINAL | | LINK END HOLE DIAMETER | 0.437 INCHES MINIMUM AND 0.438 INCHES MAXIMUM | | LINK END THICKNESS | 0.500 INCHES NOMINAL | | MAJOR DIAMETER | 0.8742 INCHES MINIMUM AND 0.9081 INCHES MAXIMUM | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-A-367, COMP 2014, T6 FED SPEC SINGLE MATERIAL RESPONSE | | MATERIAL | ALUMINUM ALLOY | | MINOR DIAMETER | 0.8125 INCHES MINIMUM AND 0.8160 INCHES MAXIMUM | | OVERALL WIDTH | 1.200 INCHES NOMINAL | | SPECIAL FEATURES | BUSHING NO. 540-011-421-17 INSTALLED IN LINK END HOLE,ONE HOLE 0.193 IN. DIA DRILLED THRU SHAFT END 0.680 IN.FROM SPLINE CENTER | | SHAFT END THICKNESS | 0.500 INCHES NOMINAL | | SHAFT SECURING METHOD | SPLINE | | SPLINE QUANTITY | 27 | | STYLE DESIGNATOR | FLAT, ONE HOLE LINK END | | SURFACE TREATMENT | ANODIZE |
|
|