| CASING MATERIAL | STEEL |
| CASING SURFACE TREATMENT | ZINC COATED |
| CASING OUTSIDE DIAMETER | 0.330 INCHES NOMINAL |
| END CONNECTION TYPE | THREADED INTERNAL BOTH ENDS |
| THREAD LOCATION | INTERNAL BOTH ENDS |
| SCREW THREAD SERIES DESIGNATOR | UNS BOTH ENDS |
| THREAD DIRECTION | RIGHT-HAND BOTH ENDS |
| THREAD CLASS | 2 BOTH ENDS |
| THREAD DEPTH | 0.2425 INCHES MINIMUM AND |
| 0.2585 INCHES MAXIMUM BOTH ENDS |
| END OVERALL DIAMETER | 0.625 INCHES NOMINAL BOTH ENDS |
| SWIVEL END | NOT PROVIDED BOTH ENDS |
| WRENCHING FACILITY TYPE | KNURLED SURFACE BOTH ENDS |
| WRENCHING FACILITY OUTSIDE DIAMETER | 0.625 INCHES NOMINAL BOTH ENDS |
| LUBRICATION FITTING | NOT PROVIDED BOTH ENDS |
| CORE MATERIAL | STEEL |
| CORE DIAMETER | 0.145 INCHES MINIMUM AND |
| 0.150 INCHES MAXIMUM |
| CORE ROTATION DIRECTION | CLOCKWISE |
| END TYPE | ROUND, INTERNAL SPLINED BOTH ENDS |
| TIP LENGTH | 0.437 INCHES NOMINAL BOTH ENDS |
| CROSS SECTION SIZE AND LOCATION | 0.344 INCHES NOMINAL DIAMETER BOTH ENDS |
| SETSCREW | NOT INCLUDED BOTH ENDS |
| SPLINE TYPE | INVOLUTE BOTH ENDS |
| SPLINE QUANTITY | 15 BOTH ENDS |
| SPLINE MAJOR DIAMETER | 0.240 INCHES MINIMUM AND |
| 0.242 INCHES MAXIMUM BOTH ENDS |
| SPLINE MINOR DIAMETER | 0.194 INCHES MINIMUM AND |
| 0.196 INCHES MAXIMUM BOTH ENDS |
| SPLINE LENGTH | 0.240 INCHES MINIMUM AND |
| 0.260 INCHES MAXIMUM BOTH ENDS |
| PITCH DIAMETER | 0.212 INCHES MINIMUM AND |
| 0.214 INCHES MAXIMUM BOTH ENDS |
| SPLINE PRESSURE ANGLE IN DEG | 14.5 BOTH ENDS |
| CORE REMOVABILITY | REMOVABLE |
| TORSIONAL DEFLECTION RATING | 7 DEG FT-LB IN. TORSIONAL DEFLECTION RATING IN WINDING AND UNWINDING DIRECTION |
| NONDEFINITIVE SPEC/STD DATA | AMC-215 TYPE |
| FSC APPLICATION DATA | RADIO SET,RADIO COMMUNICATIONS EQUIPMENT,AIRBORNE |
| SPEC/STD CONTROLLING DATA | |
| MANUFACTURERS CODE | 81349 |
| NON-DEFINITIVE GOVERNMENT SPEC/STD REFERENCE | MILS3644AMENDITYPEM6215 |