|
|
|
National Stock Number:
1650-01-399-6272
Federal Supply Class:
1650
National Item Identification Number:
013996272
Description:
FILTER ELEMENT,FLUID
Detail:
A replaceable device designed to remove solid particles from fluids ranging in density from heavy liquids to gases. The removal of particles is accomplished by porous material (metallic or non-metallic), stacked disks, wound wire, or the like, constructed so the fluid can flow through the device while the solid particles are retained. It may be designed to fit into a FILTER, FLUID (or similar cavity), or it may have an integral outer casing and mounting facilities and be designed to connect directly to an engine, compressor, or the like. The degree of removal of particles must be nominally rated at less than 50 microns or absolutely rated at less than 75 microns. Excludes FILTER ELEMENT, AIR CONDITIONING. See also STRAINER ELEMENT, SEDIMENT.
|
Manufacturer Information:
| AC-8397F- | 18350 | PALL AEROPOWER CORPORATION | | AC-8397F-10 | 18350 | PALL AEROPOWER CORPORATION |
|
Techincal Specification:
| FILTERING MEDIA DESIGN | POROUS SINGLE FILTERING MEDIA RESPONSE | | FILTERING SYSTEM FOR WHICH DESIGNED | FULL FLOW | | FILTRATION RATING IN MICRONS | 25.0 ABSOLUTE AND 10.0 NOMINAL | | FLOW DIRECTION | OUTSIDE IN | | MATERIAL | FIBER AND FIBER SYNTHETIC AND RESIN SYNTHETIC FILTERING MEDIUM | | III STYLE DESIGNATOR | SUMP TYPE | | PROPRIETARY CHARACTERISTICS | PACS | | MEDIA FOR WHICH DESIGNED | FUEL/OIL, HYDROCARBON | | SPECIAL FEATURES | UNTHREADED MOUNTING FACILITIES | | TEMP RATING | -65.0 DEG FAHRENHEIT MINIMUM AND 275.0 DEG FAHRENHEIT MAXIMUM | | DESIGN TYPE | NONREUSABLE | | DIFFERENTIAL PRESSURE | 4500.0 POUNDS PER SQUARE INCH | | DROP PRESSURE | 12.0 POUNDS PER SQUARE INCH | | BODY DIAMETER | 1.365 NOMINAL MILS AND 1.385 NOMINAL CENTIMETERS | | BODY OVERALL LENGTH | 2.145 NOMINAL MILS AND 2.205 NOMINAL CENTIMETERS |
|
|