|
|
|
National Stock Number:
1650-01-350-7619
Federal Supply Class:
1650
National Item Identification Number:
013507619
Description:
FILTER ELEMENT,FLUID
Detail:
A replaceable device designed to remove solid particles from fluids ranging in density from heavy liquids to gases. The removal of particles is accomplished by porous material (metallic or non-metallic), stacked disks, wound wire, or the like, constructed so the fluid can flow through the device while the solid particles are retained. It may be designed to fit into a FILTER, FLUID (or similar cavity), or it may have an integral outer casing and mounting facilities and be designed to connect directly to an engine, compressor, or the like. The degree of removal of particles must be nominally rated at less than 50 microns or absolutely rated at less than 75 microns. Excludes FILTER ELEMENT, AIR CONDITIONING. See also STRAINER ELEMENT, SEDIMENT.
|
Manufacturer Information:
| 5908118 | 99167 | HAMILTON SUNDSTRAND CORPORATION | | 5908118-2 | 99167 | HAMILTON SUNDSTRAND CORPORATION | | R9W2332-826 | 00736 | FALLS FILTRATION TECHNOLOGIES, INC. | | 747985 FIND 62 | 99167 | HAMILTON SUNDSTRAND CORPORATION |
|
Techincal Specification:
| STYLE DESIGNATOR | CYLINDRICAL W/OUT CONTAINER | | BODY DIAMETER | 0.675 INCHES NOMINAL | | BODY OVERALL LENGTH | 2.408 INCHES NOMINAL | | MATERIAL | STEEL CORROSION RESISTING FILTERING MEDIUM | | MATERIAL DOCUMENT AND CLASSIFICATION | AISI 300 AND 400 SERIES STAINLESS STEEL ASSN STD SINGLE MATERIAL RESPONSE FILTERING MEDIUM | | FILTERING MEDIA DESIGN | WOVEN SINGLE FILTERING MEDIA RESPONSE | | DESIGN TYPE | REUSABLE | | FILTRATION RATING IN MICRONS | 10.0 NOMINAL | | MEDIA FOR WHICH DESIGNED | FUEL/OIL, HYDROCARBON | | TEMP RATING | -65.0 DEG FAHRENHEIT MINIMUM AND | | 275.0 DEG FAHRENHEIT MAXIMUM | | DIFFERENTIAL PRESSURE | 4000.0 POUNDS PER SQUARE INCH | | FILTERING SYSTEM FOR WHICH DESIGNED | FULL FLOW | | SPECIAL FEATURES | CAPPED ON BOTTOM OF ELEMENT; 0.188 IN. WIDE 0.501 IN. DIA SEAL RING GROOVE 0.218 FROM TOP EDGE OF ELEMENT TO CENTER OF GROOVE |
|
|