|
|
|
National Stock Number:
1650-01-346-3205
Federal Supply Class:
1650
National Item Identification Number:
013463205
Description:
FILTER ELEMENT,FLUID
Detail:
A replaceable device designed to remove solid particles from fluids ranging in density from heavy liquids to gases. The removal of particles is accomplished by porous material (metallic or non-metallic), stacked disks, wound wire, or the like, constructed so the fluid can flow through the device while the solid particles are retained. It may be designed to fit into a FILTER, FLUID (or similar cavity), or it may have an integral outer casing and mounting facilities and be designed to connect directly to an engine, compressor, or the like. The degree of removal of particles must be nominally rated at less than 50 microns or absolutely rated at less than 75 microns. Excludes FILTER ELEMENT, AIR CONDITIONING. See also STRAINER ELEMENT, SEDIMENT.
|
Manufacturer Information:
| 03205 | 59211 | PARKER-HANNIFIN CORPORATION | | 03205 | 62628 | PARKER-HANNIFIN CORPORATION | | 3PU10-025 | 59211 | PARKER-HANNIFIN CORPORATION | | 3PU10-025 | 62628 | PARKER-HANNIFIN CORPORATION |
|
Techincal Specification:
| STYLE DESIGNATOR | CYLINDRICAL W/OUT CONTAINER | | MATERIAL | METAL BODY | | CELLULOSE AND | | RESIN SYNTHETIC FILTERING MEDIUM | | FILTERING MEDIA DESIGN | PLEATED SINGLE FILTERING MEDIA RESPONSE | | DESIGN TYPE | NONREUSABLE | | FILTRATION RATING IN MICRONS | 3.0 ABSOLUTE AND | | 0.5 NOMINAL | | FLOW DIRECTION | OUTSIDE IN | | MEDIA FOR WHICH DESIGNED | AIR AND | | GAS | | TEMP RATING | 225.0 DEG FAHRENHEIT MAXIMUM | | DROP PRESSURE | 2.5 POUNDS PER SQUARE INCH | | DIFFERENTIAL PRESSURE | 11.0 POUNDS PER SQUARE INCH | | FILTERING SURFACE AREA | 0.690 SQUARE FEET | | FILTERING SYSTEM FOR WHICH DESIGNED | FULL FLOW | | SPECIAL FEATURES | MESH COVERED OUTER SURFACE; METAL END CAPS |
|
|