|
|
|
National Stock Number:
1650-01-071-4659
Federal Supply Class:
1650
National Item Identification Number:
010714659
Description:
FILTER ELEMENT,FLUID
Detail:
A replaceable device designed to remove solid particles from fluids ranging in density from heavy liquids to gases. The removal of particles is accomplished by porous material (metallic or non-metallic), stacked disks, wound wire, or the like, constructed so the fluid can flow through the device while the solid particles are retained. It may be designed to fit into a FILTER, FLUID (or similar cavity), or it may have an integral outer casing and mounting facilities and be designed to connect directly to an engine, compressor, or the like. The degree of removal of particles must be nominally rated at less than 50 microns or absolutely rated at less than 75 microns. Excludes FILTER ELEMENT, AIR CONDITIONING. See also STRAINER ELEMENT, SEDIMENT.
|
Manufacturer Information:
| 7584196 | 05228 | PTI TECHNOLOGIES INC. | | AC-9938F-10 | 18350 | PALL AEROPOWER CORPORATION | | M83860/1-10 | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | | MIL-F-83860 | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | | MIL-PRF-83860 | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M |
|
Techincal Specification:
| TEMP RATING | -65.0 DEG FAHRENHEIT MINIMUM AND | | 300.0 DEG FAHRENHEIT MAXIMUM | | DROP PRESSURE | 10.0 POUNDS PER SQUARE INCH | | DIFFERENTIAL PRESSURE | 4500.0 POUNDS PER SQUARE INCH | | TEST DATA DOCUMENT | 81349-MIL-F-8360 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). | | FSC APPLICATION DATA | HYDRAULIC FUEL SYSTEM ACFT | | SPEC/STD CONTROLLING DATA | | | MANUFACTURERS CODE | 81349 | | NON-DEFINITIVE GOVERNMENT SPEC/STD REFERENCE | MIL-PRF-83860 | | DEFINITIVE GOVERNMENT SPEC/STD REFERENCE | M83860/1-10 | | STYLE DESIGNATOR | CYLINDRICAL W/ CONTAINER (RIGID) | | BODY DIAMETER | 1.290 INCHES NOMINAL | | BODY INSIDE DIAMETER | 0.790 INCHES NOMINAL | | BODY OVERALL LENGTH | 5.395 INCHES NOMINAL | | MATERIAL | STEEL CORROSION RESISTING CONTAINER/CARTRIDGE | | STEEL CORROSION RESISTING FILTERING MEDIUM | | DESIGN TYPE | NONREUSABLE | | FILTRATION RATING IN MICRONS | 5.0 ABSOLUTE | | FLOW DIRECTION | OUTSIDE IN | | MEDIA FOR WHICH DESIGNED | FUEL/OIL, HYDROCARBON |
|
|