|
|
|
National Stock Number:
1650-00-840-3818
Federal Supply Class:
1650
National Item Identification Number:
008403818
Description:
FILTER ELEMENT,FLUID
Detail:
A replaceable device designed to remove solid particles from fluids ranging in density from heavy liquids to gases. The removal of particles is accomplished by porous material (metallic or non-metallic), stacked disks, wound wire, or the like, constructed so the fluid can flow through the device while the solid particles are retained. It may be designed to fit into a FILTER, FLUID (or similar cavity), or it may have an integral outer casing and mounting facilities and be designed to connect directly to an engine, compressor, or the like. The degree of removal of particles must be nominally rated at less than 50 microns or absolutely rated at less than 75 microns. Excludes FILTER ELEMENT, AIR CONDITIONING. See also STRAINER ELEMENT, SEDIMENT.
|
Manufacturer Information:
| AC10-1329-4D1 | 18350 | PALL AEROPOWER CORPORATION |
|
Techincal Specification:
| STYLE DESIGNATOR | CYLINDRICAL W/INTEGRAL OUTER CASING | | BODY DIAMETER | 0.313 INCHES NOMINAL | | BODY OVERALL LENGTH | 1.925 INCHES NOMINAL | | THREAD SERIES DESIGNATOR | UNF | | NOMINAL THREAD SIZE | 0.438 INCHES | | MATERIAL | METAL CONTAINER/CARTRIDGE | | STEEL FILTERING MEDIUM | | RUBBER NATURAL AND | | RUBBER SYNTHETIC SEAL | | FILTERING MEDIA DESIGN | SPIRAL WOUND SINGLE FILTERING MEDIA RESPONSE | | DESIGN TYPE | REUSABLE | | FILTRATION RATING IN MICRONS | 10.0 NOMINAL | | FLOW DIRECTION | OUTSIDE IN | | MEDIA FOR WHICH DESIGNED | ANY ACCEPTABLE | | TEMP RATING | -65.0 DEG FAHRENHEIT MINIMUM AND | | 220.0 DEG FAHRENHEIT MAXIMUM | | FSC APPLICATION DATA | FILTER,HYDRAULIC SYSTEM,AIRCRAFT | | THE MANUFACTURERS DATA | | | MANUFACTURERS CODE | 18350 | | DESIGN CONTROL REFERENCE | AC10-1329-4D1 |
|
|