| DISPLACEMENT TYPE | CONSTANT |
| SHAFT ROTATION DIRECTION | COUNTERCLOCKWISE |
| OPERATING SPEED AT RATED CAPACITY IN RPM | 8000.0 |
| CONSTANT DISPLACEMENT PER REVOLUTION | 0.049 CUBIC INCHES |
| CONNECTION TYPE | DRAIN |
| INLET |
| OUTLET |
| MOUNTING TYPE | FLANGE |
| CONNECTION QUANTITY | 3 |
| CONNECTION DESIGN | THREADED |
| DRIVE SHAFT TYPE | SPLINED, INVOLUTE EXTERNAL |
| MATERIAL | ALUMINUM ALLOY HOUSING |
| SURFACE TREATMENT | ANODIZE HOUSING |
| MOUNTING GOVERNMENT STANDARD | AND10260 |
| MAXIMUM WORKING PRESSURE RATING AT SPECIFIED TEMP RANGE | 3000 PSI AT NO SPECIFIED TEMP RANGE |
| TORQUE LOAD RATING | 23.5 INCH-POUNDS |
| CONNECTION GOVERNMENT SPEC/STD | AND10050-3,AND10050-6 AND AND10050-6 |
| THREAD SIZE | 0.375-24 AND |
| 0.563-18 |
| SCREW THREAD SERIES DESIGNATOR | UNF |
| THREAD LOCATION | INTERNAL |
| THREAD DIRECTION | RIGHT-HAND |
| KEY WIDTH | 0.281 INCHES NOMINAL |
| SPLINE QUANTITY | 11 |
| SPLINE MAJOR DIAMETER | 0.533 INCHES NOMINAL |
| SPLINE MINOR DIAMETER | 0.417 INCHES NOMINAL |
| SPLINE PITCH | 24/48 |
| PITCH DIAMETER | 0.458 INCHES NOMINAL |
| SPLINE PRESSURE ANGLE IN DEG | 30.0 |
| SPLINE LENGTH | 0.500 INCHES NOMINAL |
| DRIVE SHAFT GOVERNMENT STANDARD | AND10263 |
| SHAFT PROTRUSION LENGTH | 0.625 INCHES NOMINAL |
| MOUNTING HOLE QUANTITY | 4 |
| MOUNTING BOLT HOLE SPACING | 1.875 IN. BY 1.875 IN. C TO C |
| MOUNTING HOLE DIAMETER | 0.281 INCHES NOMINAL |
| FSC APPLICATION DATA | AIRCRAFT HYDRAULIC SYSTEM KC135 |
| SPECIAL FEATURES | W/INTEGRAL SPEED CONTROL |
| THE MANUFACTURERS DATA | |
| MANUFACTURERS CODE | 62983 |
| DESIGN CONTROL REFERENCE | ML11D06-15DS225-4 |