|
|
|
National Stock Number:
1650-00-522-2624
Federal Supply Class:
1650
National Item Identification Number:
005222624
Description:
FILTER ELEMENT,FLUID
Detail:
A replaceable device designed to remove solid particles from fluids ranging in density from heavy liquids to gases. The removal of particles is accomplished by porous material (metallic or non-metallic), stacked disks, wound wire, or the like, constructed so the fluid can flow through the device while the solid particles are retained. It may be designed to fit into a FILTER, FLUID (or similar cavity), or it may have an integral outer casing and mounting facilities and be designed to connect directly to an engine, compressor, or the like. The degree of removal of particles must be nominally rated at less than 50 microns or absolutely rated at less than 75 microns. Excludes FILTER ELEMENT, AIR CONDITIONING. See also STRAINER ELEMENT, SEDIMENT.
|
Manufacturer Information:
| 364503-2 | 45934 | ONTIC ENGINEERING & MANUFACTURING, INC | | 364503-2 | 59364 | HONEYWELL INTERNATIONAL INC. | | 7575520 | 05228 | PTI TECHNOLOGIES INC. | | 8111-42 | 13520 | DONALDSON COMPANY, INC. | | 364503-2 | 99193 | HONEYWELL INTERNATIONAL INC. |
|
Techincal Specification:
| STYLE DESIGNATOR | CYLINDRICAL W/OUT CONTAINER | | BODY DIAMETER | 1.156 INCHES NOMINAL | | BODY INSIDE DIAMETER | 0.655 INCHES MAXIMUM | | BODY OVERALL LENGTH | 3.437 INCHES MAXIMUM | | MATERIAL | PAPER FILTERING MEDIUM | | FILTERING MEDIA DESIGN | ANY ACCEPTABLE SINGLE FILTERING MEDIA RESPONSE | | DESIGN TYPE | NONREUSABLE | | FILTRATION RATING IN MICRONS | 35.0 NOMINAL | | FLOW DIRECTION | INSIDE OUT | | MEDIA FOR WHICH DESIGNED | FUEL/OIL, HYDROCARBON | | TEMP RATING | -65.0 DEG FAHRENHEIT MINIMUM AND | | 350.0 DEG FAHRENHEIT MAXIMUM | | DROP PRESSURE | 5.0 POUNDS PER SQUARE INCH | | DIFFERENTIAL PRESSURE | 150.0 POUNDS PER SQUARE INCH | | TEST DATA DOCUMENT | 99193-364503-2 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) | | FSC APPLICATION DATA | ACFT HYD SYSTEM |
|
|