|
|
|
National Stock Number:
1650-00-427-1598
Federal Supply Class:
1650
National Item Identification Number:
004271598
Description:
FILTER ELEMENT,FLUID
Detail:
A replaceable device designed to remove solid particles from fluids ranging in density from heavy liquids to gases. The removal of particles is accomplished by porous material (metallic or non-metallic), stacked disks, wound wire, or the like, constructed so the fluid can flow through the device while the solid particles are retained. It may be designed to fit into a FILTER, FLUID (or similar cavity), or it may have an integral outer casing and mounting facilities and be designed to connect directly to an engine, compressor, or the like. The degree of removal of particles must be nominally rated at less than 50 microns or absolutely rated at less than 75 microns. Excludes FILTER ELEMENT, AIR CONDITIONING. See also STRAINER ELEMENT, SEDIMENT.
|
Manufacturer Information:
| 7578826 | 05228 | PTI TECHNOLOGIES INC. | | AC-4825F-1211Y1 | 18350 | PALL AEROPOWER CORPORATION |
|
Techincal Specification:
| DROP PRESSURE | ERR-060 | | BODY DIAMETER | 3.850 INCHES NOMINAL | | BODY INSIDE DIAMETER | 1.002 INCHES MINIMUM AND 1.007 INCHES MAXIMUM | | BODY OVERALL LENGTH | 4.750 INCHES MINIMUM AND 4.810 INCHES MAXIMUM | | DESIGN TYPE | NONREUSABLE | | DIFFERENTIAL PRESSURE | ERR-060 | | FILTERING MEDIA DESIGN | PLEATED SINGLE FILTERING MEDIA RESPONSE | | FILTRATION RATING IN MICRONS | 3.0 ABSOLUTE | | FLOW DIRECTION | INSIDE OUT | | FSC APPLICATION DATA | HYDRAULIC SYSTEM,ACFT | | MEDIA FOR WHICH DESIGNED | FUEL/OIL, HYDROCARBON | | STYLE DESIGNATOR | CYLINDRICAL W/CLOSED ENDS | | TEMP RATING | -65.0 FAHRENHEIT MINIMUM AND 275.0 FAHRENHEIT MAXIMUM | | TEST DATA DOCUMENT | 77272-114HS135 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) |
|
|