|
|
|
National Stock Number:
1650-00-289-9712
Federal Supply Class:
1650
National Item Identification Number:
002899712
Description:
FILTER ELEMENT,FLUID
Detail:
A replaceable device designed to remove solid particles from fluids ranging in density from heavy liquids to gases. The removal of particles is accomplished by porous material (metallic or non-metallic), stacked disks, wound wire, or the like, constructed so the fluid can flow through the device while the solid particles are retained. It may be designed to fit into a FILTER, FLUID (or similar cavity), or it may have an integral outer casing and mounting facilities and be designed to connect directly to an engine, compressor, or the like. The degree of removal of particles must be nominally rated at less than 50 microns or absolutely rated at less than 75 microns. Excludes FILTER ELEMENT, AIR CONDITIONING. See also STRAINER ELEMENT, SEDIMENT.
|
Manufacturer Information:
| 53520 | 05228 | PTI TECHNOLOGIES INC. | | 53520 | 64829 | ARVINMERITOR INC | | PR401-7 | 64829 | ARVINMERITOR INC |
|
Techincal Specification:
| DESIGN TYPE | NONREUSABLE | | BODY DIAMETER | 0.813 NOMINAL MILS AND 0.859 NOMINAL CENTIMETERS | | BODY INSIDE DIAMETER | 0.375 INCHES NOMINAL | | BODY OVERALL LENGTH | 1.875 NOMINAL MILS AND 1.937 NOMINAL CENTIMETERS | | FILTERING MEDIA DESIGN | RADIAL FINNED SINGLE FILTERING MEDIA RESPONSE | | FILTRATION RATING IN MICRONS | 10.0 NOMINAL | | FLOW DIRECTION | OUTSIDE IN | | FSC APPLICATION DATA | HYDRAULIC SYSTEM,AIRCRAFT | | MATERIAL | PAPER FILTERING MEDIUM | | MATERIAL | RUBBER SYNTHETIC SEAL | | III STYLE DESIGNATOR | CYLINDRICAL W/OUT CONTAINER | | PROPRIETARY CHARACTERISTICS | PACS | | MEDIA FOR WHICH DESIGNED | ANY ACCEPTABLE | | TEMP RATING | -65.0 DEG FAHRENHEIT MINIMUM AND 275.0 DEG FAHRENHEIT MAXIMUM |
|
|