|
|
|
National Stock Number:
1650-00-286-2254
Federal Supply Class:
1650
National Item Identification Number:
002862254
Description:
FILTER ELEMENT,FLUID
Detail:
A replaceable device designed to remove solid particles from fluids ranging in density from heavy liquids to gases. The removal of particles is accomplished by porous material (metallic or non-metallic), stacked disks, wound wire, or the like, constructed so the fluid can flow through the device while the solid particles are retained. It may be designed to fit into a FILTER, FLUID (or similar cavity), or it may have an integral outer casing and mounting facilities and be designed to connect directly to an engine, compressor, or the like. The degree of removal of particles must be nominally rated at less than 50 microns or absolutely rated at less than 75 microns. Excludes FILTER ELEMENT, AIR CONDITIONING. See also STRAINER ELEMENT, SEDIMENT.
|
Manufacturer Information:
| 055916-04 | 90005 | PUROLATOR FACET INC. | | 1650PL0857529 | 9009H | INSPEKTORAT WSPARCIA SIL ZBROJNYCH | | 7578137-101 | 05228 | PTI TECHNOLOGIES INC. | | 1650PL1598024 | 9009H | INSPEKTORAT WSPARCIA SIL ZBROJNYCH | | 1650PL1598030 | 9009H | INSPEKTORAT WSPARCIA SIL ZBROJNYCH | | 55956 | 99167 | HAMILTON SUNDSTRAND CORPORATION | | AC-9649F-1 | 18350 | PALL AEROPOWER CORPORATION |
|
Techincal Specification:
| BODY OVERALL LENGTH | 3.800 INCHES NOMINAL | | FILTERING MEDIA DESIGN | CORRUGATED SINGLE FILTERING MEDIA RESPONSE | | FILTERING SYSTEM FOR WHICH DESIGNED | FULL FLOW | | FILTRATION RATING IN MICRONS | 40.0 ABSOLUTE AND 20.0 NOMINAL | | FLOW DIRECTION | OUTSIDE IN | | FSC APPLICATION DATA | ACFT HYDRAULIC CONSTANT SPEED DRIVE | | III STYLE DESIGNATOR | SUMP TYPE | | PROPRIETARY CHARACTERISTICS | PACS | | MEDIA FOR WHICH DESIGNED | FUEL/OIL, HYDROCARBON | | SPECIAL FEATURES | WORKING PRESSURE ISPSI,12GPM; END LUGGED NOT THEADED | | SUPPLEMENTARY FEATURES | AS DIFFERENTIATED BY SOURCE CONTROL DWG NO. 55956 FSCM 99167 | | TEMP RATING | -65.0 DEG FAHRENHEIT MINIMUM AND 375.0 DEG FAHRENHEIT MAXIMUM | | DESIGN TYPE | NONREUSABLE | | DROP PRESSURE | 3.0 POUNDS PER SQUARE INCH | | BODY DIAMETER | 1.500 INCHES NOMINAL |
|
|