|
|
|
National Stock Number:
1650-00-234-9350
Federal Supply Class:
1650
National Item Identification Number:
002349350
Description:
FILTER ELEMENT,FLUID
Detail:
A replaceable device designed to remove solid particles from fluids ranging in density from heavy liquids to gases. The removal of particles is accomplished by porous material (metallic or non-metallic), stacked disks, wound wire, or the like, constructed so the fluid can flow through the device while the solid particles are retained. It may be designed to fit into a FILTER, FLUID (or similar cavity), or it may have an integral outer casing and mounting facilities and be designed to connect directly to an engine, compressor, or the like. The degree of removal of particles must be nominally rated at less than 50 microns or absolutely rated at less than 75 microns. Excludes FILTER ELEMENT, AIR CONDITIONING. See also STRAINER ELEMENT, SEDIMENT.
|
Manufacturer Information:
| 21-11125-7 | 05228 | PTI TECHNOLOGIES INC. | | 21-11125-7 | 81873 | WOODWARD HRT INC | | AC8397E7 | 18350 | PALL AEROPOWER CORPORATION | | 93399-7 | 82106 | PARKER-HANNIFIN CORPORATION | | 21-11125-7 | 96124 | TRANSDIGM INC |
|
Techincal Specification:
| STYLE DESIGNATOR | CYLINDRICAL W/OUT CONTAINER | | BODY DIAMETER | 0.872 INCHES MINIMUM AND | | 0.878 INCHES MAXIMUM | | BODY INSIDE DIAMETER | 0.561 INCHES MINIMUM AND | | 0.563 INCHES MAXIMUM | | BODY OVERALL LENGTH | 2.300 INCHES NOMINAL | | MATERIAL | STEEL CORROSION RESISTING FILTERING MEDIUM | | DESIGN TYPE | NONREUSABLE | | FILTRATION RATING IN MICRONS | 25.0 ABSOLUTE | | FLOW DIRECTION | INSIDE OUT | | MEDIA FOR WHICH DESIGNED | ANY ACCEPTABLE | | FSC APPLICATION DATA | MANIFOLD ASSEMBLY | | THE MANUFACTURERS DATA | | | MANUFACTURERS CODE | 82106 | | DESIGN CONTROL REFERENCE | 93399-7 |
|
|