|
|
|
National Stock Number:
1650-00-220-2417
Federal Supply Class:
1650
National Item Identification Number:
002202417
Description:
FILTER ELEMENT,FLUID
Detail:
A replaceable device designed to remove solid particles from fluids ranging in density from heavy liquids to gases. The removal of particles is accomplished by porous material (metallic or non-metallic), stacked disks, wound wire, or the like, constructed so the fluid can flow through the device while the solid particles are retained. It may be designed to fit into a FILTER, FLUID (or similar cavity), or it may have an integral outer casing and mounting facilities and be designed to connect directly to an engine, compressor, or the like. The degree of removal of particles must be nominally rated at less than 50 microns or absolutely rated at less than 75 microns. Excludes FILTER ELEMENT, AIR CONDITIONING. See also STRAINER ELEMENT, SEDIMENT.
|
Manufacturer Information:
| 055242 | 90005 | PUROLATOR FACET INC. | | 071-45825 | 94697 | MOOG INC | | 3722-501 | 05CK7 | WINTEC LLC |
|
Techincal Specification:
| STYLE DESIGNATOR | CYLINDRICAL W/OUT CONTAINER | | BODY DIAMETER | 0.151 INCHES MINIMUM AND | | 0.161 INCHES MAXIMUM | | BODY INSIDE DIAMETER | 0.113 INCHES MINIMUM AND | | 0.119 INCHES MAXIMUM | | BODY OVERALL LENGTH | 0.915 INCHES MINIMUM AND | | 0.925 INCHES MAXIMUM | | MATERIAL | STEEL CORROSION RESISTING FILTERING MEDIUM | | FILTERING MEDIA DESIGN | MESH SINGLE FILTERING MEDIA RESPONSE | | DESIGN TYPE | LIMITED | | FILTRATION RATING IN MICRONS | 35.0 ABSOLUTE AND | | 20.0 NOMINAL | | FLOW DIRECTION | OUTSIDE IN | | MEDIA FOR WHICH DESIGNED | FUEL/OIL, HYDROCARBON | | TEMP RATING | -65.0 DEG FAHRENHEIT MINIMUM AND | | 275.0 DEG FAHRENHEIT MAXIMUM | | DROP PRESSURE | 10.0 POUNDS PER SQUARE INCH | | FILTERING SYSTEM FOR WHICH DESIGNED | FULL FLOW |
|
|